2020 Low Rider S owners
#2061
#2062
today I took advantage of the rain to mount the big leather saddlebag I had on the Heritage at the start...
I like it, it gives it a bit of an adventurer look, and now at least I can take things with me, go shopping. I've always liked having at least one saddlebag on my bikes, it's very practical...
I think it's a bit low and too far back, so I'll probably change its position...
I like it, it gives it a bit of an adventurer look, and now at least I can take things with me, go shopping. I've always liked having at least one saddlebag on my bikes, it's very practical...
I think it's a bit low and too far back, so I'll probably change its position...
The following users liked this post:
Durham man (09-23-2023)
#2063
The following 4 users liked this post by Durham man:
#2064
#2065
the trask is supposed to eliminate or reduce oil from the head breather’s. Some do the external and trask. Some say doing the external breather takes away needed vacuum. I don’t know. I get very little oil from my head breather’s. The trask is a very nice piece, I now have replaced the 3 plastic parts that should not be on a Harley Davidson motorcycle. The plastic intake manifold, the tappet cuffs and the plastic trans cover. Not saying they are problematic they are just ****.
Last edited by Durham man; 09-24-2023 at 06:30 AM.
The following 2 users liked this post by Durham man:
natural gasser (09-25-2023),
NZLowrider (09-24-2023)
#2066
I agree about what you say about plastic parts, I didn't know about the tappet cuffs...
I'll probably change the gearbox cover in a while, but for now I've got other priorities to finalize the ergonomics adjustment and also fit a fairing before winter. As for the intake manifold, I'd rather not touch anything, since my bike runs just fine as it is and I don't feel like tuning it...
I'll probably change the gearbox cover in a while, but for now I've got other priorities to finalize the ergonomics adjustment and also fit a fairing before winter. As for the intake manifold, I'd rather not touch anything, since my bike runs just fine as it is and I don't feel like tuning it...
Last edited by Big Al 59; 09-25-2023 at 01:45 AM.
#2067
The following 2 users liked this post by RichM752:
CatEyeDallas (09-25-2023),
Durham man (09-24-2023)
The following users liked this post:
Durham man (09-26-2023)
#2069
"trask is on!!! "
Durham Man I did the balloon test, getting air pressure, also getting a little oil out of the breather on hard runs even though I',m running a half quart low. Trask suggests doing just the trans cover, did you vent the heads outside of the air breather also?
Durham Man I did the balloon test, getting air pressure, also getting a little oil out of the breather on hard runs even though I',m running a half quart low. Trask suggests doing just the trans cover, did you vent the heads outside of the air breather also?
The following users liked this post:
natural gasser (09-26-2023)
The following users liked this post:
Durham man (09-27-2023)