2020 Low Rider S owners
#1971
Off with the pegs, on with the mini floor boards. On my highway pegs set up.They feel great.they feel so good I might put the Hd large mini floor boards on my mids. Never did as I have my riding position set very very comfortable and don’t want to raise my foot height with floor boards.
Picked up the large mini floor boards to install and match the small mini floor boards on my highway pegs. Also ordered dk custom’s softail m8 peg adapter’s as they are the old style pegs.
The following users liked this post:
natural gasser (05-21-2023)
#1972
Were I got the idea
I asked Paul in comments if the mini’s raise or change foot height. He says it is the same as the stock peg height. That was the main reason I did not buy the trashin mini floor boards as they raise foot height and like all metal floor boards they might cause vibration issues. The Hd’s have rubber top pads and are reasonably priced.
Last edited by Durham man; 05-20-2023 at 04:37 PM.
The following users liked this post:
natural gasser (05-21-2023)
The following users liked this post:
Durham man (05-21-2023)
#1974
I should have the peg adapter’s in a couple days from dk’s, I will let you know how it goes. I think they will work well.
The following users liked this post:
natural gasser (05-22-2023)
#1975
Were I got the idea https://youtu.be/Fn2jNSKRHkM I asked Paul in comments if the mini’s raise or change foot height. He says it is the same as the stock peg height. That was the main reason I did not buy the trashin mini floor boards as they raise foot height and like all metal floor boards they might cause vibration issues. The Hd’s have rubber top pads and are reasonably priced.
Spikes look dangerous.
The following users liked this post:
Durham man (05-21-2023)
#1976
#1977
Floor boards done, they feel great! Time to test ride.
Last edited by Durham man; 05-26-2023 at 04:20 AM.
#1978
NG I was able to get some good riding in yesterday, very happy with the new boards. I was wondering if they would move around when using my HW pegs but they stayed put. I did have to adjust my shifter up one notch. They don’t feel higher but because they are wider it called for the adjustment. They do provide a nice planted feel.
Last edited by Durham man; 05-27-2023 at 01:29 AM.
#1979
Some update.
Trimmed and wrapped the Clearview 11” windshield. Also, mounted the Baja Designs S1 on the forward bolt of the fairing’s lower bracket (for now). Currently sorting-out the wirings.
Slid the fork legs down flush with the top tree and made some aluminum shims for the lower tree.
A peek of the painted carbon fiber rear-fender. The front fender and side tins have the same visual effect.
Trimmed and wrapped the Clearview 11” windshield. Also, mounted the Baja Designs S1 on the forward bolt of the fairing’s lower bracket (for now). Currently sorting-out the wirings.
Slid the fork legs down flush with the top tree and made some aluminum shims for the lower tree.
A peek of the painted carbon fiber rear-fender. The front fender and side tins have the same visual effect.
The following 6 users liked this post by 2waam:
CatEyeDallas (05-30-2023),
Durham man (05-28-2023),
HD_fan (05-29-2023),
headcase617 (06-06-2023),
Phil McGrath (06-04-2023),
and 1 others liked this post.
#1980
Thank you BillTownssi for the generous pice and fast shipping!
I bought the saddlemen explorer seat from forum member BillTownssi at a great price. I have been running the Hd tall boy to comfortably run the stock mid controls. The explorer also lifts the rider up but I feel a little more forward. Definitely better back support. I like it.
Last edited by Durham man; 06-03-2023 at 03:52 AM.
The following users liked this post:
2waam (06-03-2023)