Memphis shades turn signal kit (without OEM lightbar) for 05-10 Harley FLSTN3. Fit my 2020 sport glide just fine but you’ll need to buy slightly longer bolts to attach the fairing connector to the fork unit as the brackets are 1/8” thick. Reassembling the fairing requires some flexing to fit back on. Painful but doable.
I also did a beginners wiring job. Just clipped the wires at the signals and extended them down the inside of the fairing. Cheesy but worked fine and avoided having to remove the tank and re-thread wires. Also looks fine with black shrink tubing around all wiring.
I was interested in the floorboard modification and went to the dealer with the "belloc 42 parts list", but in Europe the Harley parts are ridiculous expensive and the Fat Boy brackets and floorboards cost about 700 dollars....but last week I read that a guy was selling a complet floorboard and bracket set for a 2018 Fat Boy, the parts were new and disassembled before the bike left the showroom.....he asked 220 dollars.....I bought the set and assembling took 15 minutes....riding is awesome!
looks good mate, I’ve noticed some floor boards sit higher than stock pegs. So I’m wondering; Do you think you get more “lean angle” / clearance with them or worse?
I have the kuyiakyn floor boards and see no difference but I’ve never had a clearance problem with either. I guess if you’re racing on a tight-looped closed track, it could be a concern but not likely in the real world.
looks good mate, I’ve noticed some floor boards sit higher than stock pegs. So I’m wondering; Do you think you get more “lean angle” / clearance with them or worse?
I have Kuryakyn boards. I find that I scrape the boards about as often as I scraped my heels with the forward pegs. I prefer scraping the boards than my heels.
I have Kuryakyn boards. I find that I scrape the boards about as often as I scraped my heels with the forward pegs. I prefer scraping the boards than my heels.
I installed the HD boards. I don't scrape solo, but two up. I've scraped the feelers on the boards a bunch! Sounds it makes is pretty disturbing! haha
I installed the HD boards. I don't scrape solo, but two up. I've scraped the feelers on the boards a bunch! Sounds it makes is pretty disturbing! haha
I'd really like to have the HD floorboard setup, but didn't want to cough up the dough. The Kuryakyn is a decent second place for the $$ in my opinion. Maybe someday I'll find someone giving away thier Fat Boy board setup for dirt cheap.
Could you please tell me which model chrome switch covers you bought, only they don’t do them specifically for the Glide.
I want to fit them on mine and the Harley dealer will order them for me
Thankyou
Your Bike looks really cool
M.Mansfield
Last edited by Martin Mansfield; 06-24-2020 at 02:55 PM.
Could you please tell me which model chrome switch covers you bought, only they don’t do them specifically for the Glide.
I want to fit them on mine and the Harley dealer will order them for me
06-14-2020, 08:11 PM
Turn signal relocation
