What did you do to your 18+ softail today?
#4451
Installed a Denali Soundbomb (the split one) on my 2021 Low Rider S today behind my Road Warrior fairing - heaps of room. Zip tied the horn component to the existing fairing bracket and used an L bracket to secure the compressor to the bottom mount of the existing fairing bracket (that is secured to the triple trees) - all super secure. The horn is extremely loud (100% happy with it) - scared myself when I tested it - no more beep beep road runner !!!
As an fyi I had previously added some support brackets to the original fairing bracket to try to stop my phone mount (which was attached to it) from shaking. Did not work so attached the phone mount to the risers but left the support bracket there - it adds no value to the Denali install (I just could not be bothered taking it off)
As an fyi I had previously added some support brackets to the original fairing bracket to try to stop my phone mount (which was attached to it) from shaking. Did not work so attached the phone mount to the risers but left the support bracket there - it adds no value to the Denali install (I just could not be bothered taking it off)
The following 3 users liked this post by imoo6170:
#4452
The following 10 users liked this post by yobtaf103:
Glenn Gorman (01-12-2023),
Henboykin (01-29-2023),
krvnrch (01-13-2023),
MrLongbeard (01-13-2023),
OldMike (01-14-2023),
and 5 others liked this post.
#4454
#4455
The following 4 users liked this post by UncleDavesGarage:
#4456
#4457
#4458
I have this seat on my Fat Boy, it's my "Bike Night/Show Bike" seat. I turned out to be really good for corning in the twisties and hard acceleration too. So it's my "Racing" seat. It's shaped well enough to keep you in the seat when hard on the throttle, but it's also low and shaped neutral enough to let you move your *** around in the seat for inside over the tank(motoGP style) body position.
It's a really great seat.
I got the Knuckle one though since it had a bit more of a kickup back than the LS.
It's a really great seat.
I got the Knuckle one though since it had a bit more of a kickup back than the LS.
The following 2 users liked this post by FranBunnyFFXII:
stormin08 (01-14-2023),
UncleDavesGarage (01-14-2023)
#4459
took it out a spin with the tune and new exhaust... I know, 2 into 1 would make more power. not a concern here, i purely wanted a look, and so far these bassani pro streets are doing.
found a cool old service station in town, and need to get a better camera and get some good pics.
so far, the bike has
all CIRO LED signals, black with the visor
Bassani Prostreet 2 into 2
Stage 1 tune
Swing arm bag
and 750 miles now,,,
really debating on a cam swap at the 1000 mile service, but of course the dealer warranty had me leaning toward a SE cam...just dont see any drop ins making more torque. 1 is close, and of couse HP is higher...but this bike runs pretty good as is.
found a cool old service station in town, and need to get a better camera and get some good pics.
so far, the bike has
all CIRO LED signals, black with the visor
Bassani Prostreet 2 into 2
Stage 1 tune
Swing arm bag
and 750 miles now,,,
really debating on a cam swap at the 1000 mile service, but of course the dealer warranty had me leaning toward a SE cam...just dont see any drop ins making more torque. 1 is close, and of couse HP is higher...but this bike runs pretty good as is.
The following users liked this post:
RGS88 (01-14-2023)
#4460