Where do I get one of these? does it change the sound much?
I have these in my Pipes. They will definitely add a lot of decel gurgling/rumble noise.
They lower the noise output and give the exhaust note a much more aggressive sound.
It lower's the exhaust note as well, deeper sound.
You can run a torque insert by coupling reducer to end cap bolt in the Bassani. No drilling required.
did you have to cut the threaded rod to install that coupler? I wonder if the smallest ones would work in a set of Rinehart 2-into-2's using existing holes.
did you have to cut the threaded rod to install that coupler? I wonder if the smallest ones would work in a set of Rinehart 2-into-2's using existing holes.
I wanna say I did trim the threaded rod on the torque insert to center it. I put it on a while ago. It was a very easy install.
New project. Test fitting the Kodlin shorty rear steel fender. Fit and finish of this product is top notch. 260 tire tucks nicely right under the fender. Obviously if I had a total loss of air pressure the tire would hit. No rubbing when suspension is aired up. Here are pictures aired up and slammed.
You can run a torque insert by coupling reducer to end cap bolt in the Bassani. No drilling required.
update, I have been running the torque insert in the end cap bolt. I always figured it would do more running it in the actual baffle hole but the baffle blocks access. I pulled the baffle, did some grinding. Now I can run it in the baffle bolt hole.it is now tight to the baffle. I also pulled the packing of the baffle. I gained low end and it sounds amazing!
Little heat paint and good to go!
update, I have been running the torque insert in the end cap bolt. I always figured it would do more running it in the actual baffle hole but the baffle blocks access. I pulled the baffle, did some grinding. Now I can run it in the baffle bolt hole.it is now tight to the baffle. I also pulled the packing of the baffle. I gained low end and it sounds amazing!
My dad left me his K&N air filter when he upgraded to the SE Ventilator. Amazon finally had their black air filter oil in stock so I oiled it and threw it on. Oh also flipped my mirrors. One day when it stops pouring down rain I’ll finally get to ride it.
Great work going on here. Can't wait to see the finished product.
Zach
Originally Posted by andres.0321@hotmail.com
New project. Test fitting the Kodlin shorty rear steel fender. Fit and finish of this product is top notch. 260 tire tucks nicely right under the fender. Obviously if I had a total loss of air pressure the tire would hit. No rubbing when suspension is aired up. Here are pictures aired up and slammed.
08-28-2022, 02:56 AM
