What did you do to your 18+ softail today?
#2762
Like Your Setup!
What brand/model are your saddlebags? I’m running the same exhaust you are and clearance is supposedly a concern.
Thanks.
Thanks.
Added a set of Black Rear Saddlebag Guards to my Cherry. Hardware provided seemed to be short two bolts of the correct length. Purchased 4 of the proper length bolts in Stainless Steel.
I had previously removed the passenger pegs so it was an easy install as the existing bolts holding the passenger foot boards were easily removed. The foot peg bolts can be very difficult to remove as I and others have found.
Right side in close. My Wolo horn and pasenger foot boards went back on with no problem.
Left side in close
Right side
left side
I think they look good and wil be very useful the next time I set the bike on its side during PLP. I'll have something to grab onto when picking it up.
I had previously removed the passenger pegs so it was an easy install as the existing bolts holding the passenger foot boards were easily removed. The foot peg bolts can be very difficult to remove as I and others have found.
Right side in close. My Wolo horn and pasenger foot boards went back on with no problem.
Left side in close
Right side
left side
I think they look good and wil be very useful the next time I set the bike on its side during PLP. I'll have something to grab onto when picking it up.
#2763
The following users liked this post:
gthmnyt2580 (05-31-2021)
#2764
#2765
The following 3 users liked this post by OldMike:
#2768
#2769
The following users liked this post:
OldMike (05-23-2021)
#2770
BEFORE
AFTER
The following 3 users liked this post by geoaero: