Everything 2018 FatBoy thread
#511
The following users liked this post:
wjcbsr (02-12-2021)
#513
The following 6 users liked this post by wjcbsr:
FranBunnyFFXII (02-12-2021),
Heed (02-12-2021),
MoneyFor (02-14-2021),
OldMike (02-12-2021),
pinoy (02-14-2021),
and 1 others liked this post.
#514
Thanks for rolling it out, get a better idea of the sound.
Bet you can't wait.
Last edited by OldMike; 02-12-2021 at 12:29 PM.
The following users liked this post:
wjcbsr (02-13-2021)
#518
I have a new 2018 114 FB. Sometimes getting it in neutral is difficult when I am parked, and have finished riding, so I will just cut it off while in gear with clutch pulled in. When I go to start it back up, I will pull the clutch in and start it in gear. My question is, is it hard on the bike to start it with the clutch pulled in while in gear? Will it damage anything? I would rather start it in neutral, but if there is no harm starting it with the clutch in while in gear, then that is good to know.
It is easy to do if your that way inclined. Pop derby cover, loosen jam nut back out Allen key . Back of clutch cable by unclipping lock on cable adjuster push together and lock in retracted position, wind the adjustment bolt in till it JUST touches no more, double check your self, then 3/4turn in, lock jam nut, 10ftlb I think it is, unclip cable lock it self adjusts, then lock it again. Check cable and level free play, check clutch basket movement. Install derby cover and new seal.
#519
Hey guys quick question, do the floorboard inserts on the bike flex and tilt around?
I was watching this guy install something on his roadglide and I noticed when his foot when moved around on the floorboard surface it would tilt and flex in that direction.
Do the floorboards that that on the fat boy?
I was watching this guy install something on his roadglide and I noticed when his foot when moved around on the floorboard surface it would tilt and flex in that direction.
Do the floorboards that that on the fat boy?
#520