Everything 2018 FatBoy thread
#1741
I've just bought these from AliExpress (arrived this week) with the intention of, not using them for what they are designed for but, customising them, using a concho, stud and rivet craft kit, to look like a western saddle.
Watch this space!
Watch this space!
The following users liked this post:
MoneyFor (07-29-2024)
#1742
I've just bought these from AliExpress (arrived this week) with the intention of, not using them for what they are designed for but, customising them, using a concho, stud and rivet craft kit, to look like a western saddle.
Watch this space!
Watch this space!
#1744
Fitted the tool roll and rear rack
There's actually a metal supporting plate inside the tool roll.
As it stands at the moment
...few other bits to do (Seat and Rider backrest).
If you are wondering why I'm doing this Western theme, well, over the UK August Bank Holiday, there's a Wild West theme Classic, Custom and American show that I want to go to.
Also, all the items fitted are very easy to remove/swap over so that I can TRANSFORMer into a different themed bike.
There's actually a metal supporting plate inside the tool roll.
As it stands at the moment
...few other bits to do (Seat and Rider backrest).
If you are wondering why I'm doing this Western theme, well, over the UK August Bank Holiday, there's a Wild West theme Classic, Custom and American show that I want to go to.
Also, all the items fitted are very easy to remove/swap over so that I can TRANSFORMer into a different themed bike.
Last edited by Urban Gorilla; 07-28-2024 at 09:20 AM.
The following users liked this post:
MoneyFor (07-29-2024)
#1745
#1747
Ok, I finally managed to finish and mount the rear fender and put on the new custom seat. I'm not 100% happy with the paint job but for now it's good enough so I can still ride the bike this "summer". I want to tackle a few things this winter
and then I'll also apply a few extra layers of clearcoat to the fender.
Currently I have the airride limited that this is the lowest position, as it is now in the pictures. On my Breakout it was lower but regularly had damage to the backside from stones and because of that I wanted to give a bit more space between
tire and fender so I don't have to keep touching up the paintwork
and then I'll also apply a few extra layers of clearcoat to the fender.
Currently I have the airride limited that this is the lowest position, as it is now in the pictures. On my Breakout it was lower but regularly had damage to the backside from stones and because of that I wanted to give a bit more space between
tire and fender so I don't have to keep touching up the paintwork
The following 3 users liked this post by MoneyFor:
#1748
The following 2 users liked this post by Urban Gorilla:
MoneyFor (08-02-2024),
StevieMac! (08-02-2024)
#1749
The following users liked this post:
Urban Gorilla (08-02-2024)
#1750
The following 2 users liked this post by StevieMac!:
MoneyFor (08-02-2024),
Urban Gorilla (08-02-2024)