Anyone go with either the trackerdie +2 damper rods or +2 fork cartridge for the low rider?
Does it change the handling drastically?
I'm just looking to get more lean angle out of my Low Rider. I already installed the taller Low Rider ST shock which improved it a bit but I would like to get just a bit more if possible.
Kind of unsettling whenever I scrape my pegs and/or my heels when I'm leaned over trying to go around a corner. Or is my technique just bad that even though I'm leaned over enough to scrape, the bike is not cornering?

 

Thanks for all the useful info, I’m 5’10” but sometimes my legs cramp ;(. Lol

 

Harley never made a 2020 Lowrider CVO, so I did it for them. You're welcome.

2020 FXLR 27K

 

Great work - looks fantastic !!!!

 

Thanks.Great bike to begin with, just thought she needed a little make up.

 

Well done! It looks fantastic.

 

I’m done with mods for now. Did 6 inch pullback riser with gauge relocation and a cover plate. Handlebar with 4 inch rise. Big brake kit and extended damper rods and race tech emulator valves and springs for the fork. Longer shock from the ST on the back. Longer kickstand from the 22 Low rider ST

Pull back riser with gauge relocation

I think the slightly raised height looks ok

 

Comparison of the original jiffy stand vs the 22 jiffy stand

 

Trackerdie is out of business from what I know.

 

They are now tildeathcycles.com
I ordered the extended dampers from there.
The extended dampers are not 2” longer than stock though. More like 1.5”.