2018+ Softail Models Breakout

18 lowrider owners

Thread Tools
 
Search this Thread
 
  #1051  
Old 08-21-2022 | 04:38 AM
OldMike's Avatar
OldMike
Seasoned HDF Member
Joined: Feb 2009
Posts: 5,599
Likes: 1,936
From: Cleveland Zoo
Default

Originally Posted by 2018 lowrider M8
Fitted Forward Controls to my Bike Today, went for a 3hr Ride around the hills today they work fine but now my lower back is a little sore, I will play around with the Air-Hawk and rear shock preload spring , Hope this helps a little.
I always thought mid controls on FXLR and FXLRS work well for comfort and handling on these bikes.
Why did you change to forwards.
 
  #1052  
Old 08-25-2022 | 01:16 AM
2018 lowrider M8's Avatar
2018 lowrider M8
Tourer
Joined: Jul 2018
Posts: 422
Likes: 182
From: Queensland
Default

Originally Posted by OldMike
I always thought mid controls on FXLR and FXLRS work well for comfort and handling on these bikes.
Why did you change to forwards.
Would my answer pass if i said for CHITs and Giggles, Narr seriously something different my previous bike had forwards and i was quite fond of the comfort
 
The following users liked this post:
OldMike (08-25-2022)
  #1053  
Old 08-25-2022 | 01:19 AM
2018 lowrider M8's Avatar
2018 lowrider M8
Tourer
Joined: Jul 2018
Posts: 422
Likes: 182
From: Queensland
Default

Originally Posted by OldMike
I always thought mid controls on FXLR and FXLRS work well for comfort and handling on these bikes.
Why did you change to forwards.
Would my answer pass if i said for CHITs and Giggles, Narr seriously something different my previous bike had forwards and i was quite fond of the comfort

 
The following users liked this post:
Stupidbutt (08-26-2022)
  #1054  
Old 08-25-2022 | 01:24 AM
2018 lowrider M8's Avatar
2018 lowrider M8
Tourer
Joined: Jul 2018
Posts: 422
Likes: 182
From: Queensland
Default

Originally Posted by beachboysworld goa
Like your handlebar, where did you get it from?
Harley Davidson Australia sells them as the Street Slammer Bar bought them from my local Stealership they are Robbers Dogs
 
  #1055  
Old 08-26-2022 | 05:08 PM
Stupidbutt's Avatar
Stupidbutt
Advanced
Joined: Apr 2022
Posts: 90
Likes: 417
From: Arlington, Texas
Default

I am still on the fence between forward controls and mid. I like the mids but am afraid the forward would put my leg into the intake.
 
The following users liked this post:
Dallasrandy (11-13-2023)
  #1056  
Old 08-08-2023 | 12:10 PM
VicSAZ's Avatar
VicSAZ
6th Gear
Joined: Aug 2023
Posts: 10
Likes: 8
From: Carefree, AZ
Default FXRST El Diablo Brake Pedal

I have the El Diablo bike. Turns out I was a little to tall and had to have Harley forward controls put on. The problem with the forward controls is the brake pedal; it has no tines and cannot be adjusted. It is too low and needs to be raised up about 1/2 inch or so. My Harley dealer in Scottsdale has tried to find a solution - an after market adjustable brake pedal - but to no avail. If any of you have a solution to this, please let me know. Thanks.

Ride safe.

VicSAZ
 
  #1057  
Old 08-18-2023 | 07:00 PM
Herrick's Avatar
Herrick
Road Captain
Joined: Aug 2019
Posts: 617
Likes: 196
From: Munchkinland
Default

I'm trying to put on a Memphis Shades Gauntlet fairing but it looks like the headlight brow thing has to be removed. What is the best way to remove it?
 
  #1058  
Old 08-19-2023 | 09:06 AM
ss3964spd's Avatar
ss3964spd
Tourer
Joined: Jun 2020
Posts: 290
Likes: 66
From: Fairfax, Va
Default

Herrick, if you look underneath the brow you'll see there are two hex head (allen) screws that hold it on. Note, however, that if you remove the brow you'll also have to remove the clutch cable guide that attaches to the bottom of the brow.
 
  #1059  
Old 08-19-2023 | 11:29 AM
Herrick's Avatar
Herrick
Road Captain
Joined: Aug 2019
Posts: 617
Likes: 196
From: Munchkinland
Default

Originally Posted by ss3964spd
Herrick, if you look underneath the brow you'll see there are two hex head (allen) screws that hold it on. Note, however, that if you remove the brow you'll also have to remove the clutch cable guide that attaches to the bottom of the brow.
My allen key really felt like it was going to bend and snap when I tried it yesterday. I gotta find stronger ones or something.
 
  #1060  
Old 09-01-2023 | 05:51 PM
Herrick's Avatar
Herrick
Road Captain
Joined: Aug 2019
Posts: 617
Likes: 196
From: Munchkinland
Default

What's a good replacement battery for a Low Rider? I think the battery in my bike is the one that came with it 5 years ago. I made a thread a few years ago about battery problems and I was recommended a Yuasa GYZ20HL but Amazon claims it won't fit.
 


Quick Reply: 18 lowrider owners



All times are GMT -5. The time now is 09:22 PM.