KST 10" Mayhem bars installed on 14 Street glide special.
#1
KST 10" Mayhem bars installed on 14 Street glide special.
I just installed the KST 10" bars on my 14 SGS and I like them. A huge thanks to
bpd138 and his walk through install. You won't need a book with his help. The only things I would add are:
Get the Namz control wire extensions. I got the 8" and they just barely reach.
Before you take the pins out of the plug of the TBW plug, cut the protective covering back some so you have more play in the wires.
When removing the ignition switch cover, move the switch all the way to accessory setting so it's flat. This makes space to remove the cover.
Not a bad job and we'll worth the savings!
bpd138 and his walk through install. You won't need a book with his help. The only things I would add are:
Get the Namz control wire extensions. I got the 8" and they just barely reach.
Before you take the pins out of the plug of the TBW plug, cut the protective covering back some so you have more play in the wires.
When removing the ignition switch cover, move the switch all the way to accessory setting so it's flat. This makes space to remove the cover.
Not a bad job and we'll worth the savings!
Last edited by harticat; 06-08-2015 at 09:28 PM.
#4
#7
Trending Topics
#8
I had my local indie shop do it. They extended the wires and changed the clutch cable. If not it would have been to stretched for my taste and lessens the chance of anything going wrong. Since stock bars are 8 inch I think they went plus 4 or 8 on the wires and clutch cable. You could go with the namz extensions.
Last edited by Placas; 06-09-2015 at 09:30 PM.
#10