lets see the Apes!
#3
#4
#6
Here's a side and front shot, don't have one with me sitting on the bike sorry. The wrist angle is good, I'm 5' 10" and my arms are pretty much level, so much more comfortable than stock. I did a 7500 mile trip this summer and had the stock bars, took a week for me to be able to get out of bed without crawling. First thing I did was order these bars, next up is a rider backrest.
These bars were a huge pain to wire, I had to just walk away a couple times but if I can do it pretty much anyone can.
These bars were a huge pain to wire, I had to just walk away a couple times but if I can do it pretty much anyone can.
#7
Trending Topics
#9
13" LA Choppers Prime Apes. Stock clutch/brake cables. Soldered my own wire extensions. Ended up changing out the stock mirrors as they were somewhat obscured by the switch housings. These bars are a touch shorter than Yaffe 12" mbb's but are a few inches wider. I'm 5'-10" tall and they are just below shoulder level. Pretty comfy. Low speed maneuvering took a little getting used to, but otherwise happy. Like any bars with a bend, internal wiring was a PITA. This was first set I ever did so next time should be easier. I also went with the Screamin Eagle TBW to make running its wires a little easier. I bought them from a local shop M&M Leather. Great place.
#10
Bushpilot- mind if I ask why, anything beyond just a personal preference? This is the first bike I've ever changed bars on so I'm not real familiar with all this.
Last edited by Scott14SG; 09-08-2014 at 06:39 PM. Reason: spelling