I put 14" KST bars on. Stock cables for now but they are a little tighter than I would truthfully like. Plan on going to chrome hand controls later anyway and when I do I will put extended chrome/stainless lines on (especially clutch side).
just ordered some vindika 14in bars for my 2015 street glide and I'm wondering what length of clutch and break cables I need to get. It also says to make a 1/8
More cut out on the inner fairing. Was thinking of useing a drill mill but was also wondering how others did it
just ordered some vindika 14in bars for my 2015 street glide and I'm wondering what length of clutch and break cables I need to get. It also says to make a 1/8
More cut out on the inner fairing. Was thinking of useing a drill mill but was also wondering how others did it
You don't need cables, stock ones will work. BUT, if I had it to do over would have got cables, mine are tight! Almost a little to much.
On the notching, I got a dremel, used a cutting wheel, then a sanding wheel. That's plastic melts like butter so be careful!