lets see the Apes!
#181
02-02-2015 | 09:15 AM
Cruiser
Joined: Feb 2007
Posts: 179
Likes: 0
From: Ames, Iowa
12" LA Choppers. Here is a good before and after if anyone wants to see a height comparison to the stock bars. I am 6' tall and the bars are just below shoulder height. Very comfortable. When this 10 inches of snow melts, I will be able to give it a longer ride. I also changed out the brake and clutch lines because I did not want the black lines.
#184
02-02-2015 | 03:22 PM
Road Warrior
Joined: Jun 2014
Posts: 1,745
Likes: 36
From: Lafayette La
12" LA Choppers. Here is a good before and after if anyone wants to see a height comparison to the stock bars. I am 6' tall and the bars are just below shoulder height. Very comfortable. When this 10 inches of snow melts, I will be able to give it a longer ride. I also changed out the brake and clutch lines because I did not want the black lines.
#185
02-02-2015 | 03:27 PM
Cruiser
Joined: Feb 2007
Posts: 179
Likes: 0
From: Ames, Iowa
#187
02-02-2015 | 05:52 PM
Cruiser
Joined: Oct 2014
Posts: 190
Likes: 6
From: Naples, ID
I'm about ready to **** in my hands and rub it all over my head! After 4 1/2 hours of screwing with the throttle side, all is well. So, I start on the clutch side thinking this should be easier when BAM, the Bikers Choice Primeapes are not designed for use with Harley heated grips!!! I found this out AFTER calling the Bikers Choice 800 number and them calling the manufacture. Now it all comes back apart. My question is, who makes a primeape style bar that will accept the Harley heated grips? I'll check back tomorrow to see because I'm going to go start drinking now.
#188
02-02-2015 | 06:37 PM
Stellar HDF Member
Joined: Feb 2010
Posts: 2,674
Likes: 84
From: New Jersey
I'm about ready to **** in my hands and rub it all over my head! After 4 1/2 hours of screwing with the throttle side, all is well. So, I start on the clutch side thinking this should be easier when BAM, the Bikers Choice Primeapes are not designed for use with Harley heated grips!!! I found this out AFTER calling the Bikers Choice 800 number and them calling the manufacture. Now it all comes back apart. My question is, who makes a primeape style bar that will accept the Harley heated grips? I'll check back tomorrow to see because I'm going to go start drinking now.
Last edited by offthewall; 02-02-2015 at 08:04 PM.
#189
02-02-2015 | 07:46 PM
Road Warrior
Joined: Jun 2014
Posts: 1,745
Likes: 36
From: Lafayette La
I'm about ready to **** in my hands and rub it all over my head! After 4 1/2 hours of screwing with the throttle side, all is well. So, I start on the clutch side thinking this should be easier when BAM, the Bikers Choice Primeapes are not designed for use with Harley heated grips!!! I found this out AFTER calling the Bikers Choice 800 number and them calling the manufacture. Now it all comes back apart. My question is, who makes a primeape style bar that will accept the Harley heated grips? I'll check back tomorrow to see because I'm going to go start drinking now.
i know its a pain but at this point And if you sure theres no other issues your going to run into, it may save some aggravation and shipping time and all that goes with it. good luck, keep us up dated.
agreed a beer or two would be better than your first thoughts Lol
Last edited by Gwaxley; 02-02-2015 at 08:17 PM.
#190
02-02-2015 | 07:54 PM
Cruiser
Joined: Apr 2009
Posts: 237
Likes: 5