lets see the Apes!
#181
12" LA Choppers. Here is a good before and after if anyone wants to see a height comparison to the stock bars. I am 6' tall and the bars are just below shoulder height. Very comfortable. When this 10 inches of snow melts, I will be able to give it a longer ride. I also changed out the brake and clutch lines because I did not want the black lines.
#184
12" LA Choppers. Here is a good before and after if anyone wants to see a height comparison to the stock bars. I am 6' tall and the bars are just below shoulder height. Very comfortable. When this 10 inches of snow melts, I will be able to give it a longer ride. I also changed out the brake and clutch lines because I did not want the black lines.
#185
#187
I'm about ready to **** in my hands and rub it all over my head! After 4 1/2 hours of screwing with the throttle side, all is well. So, I start on the clutch side thinking this should be easier when BAM, the Bikers Choice Primeapes are not designed for use with Harley heated grips!!! I found this out AFTER calling the Bikers Choice 800 number and them calling the manufacture. Now it all comes back apart. My question is, who makes a primeape style bar that will accept the Harley heated grips? I'll check back tomorrow to see because I'm going to go start drinking now.
#188
I'm about ready to **** in my hands and rub it all over my head! After 4 1/2 hours of screwing with the throttle side, all is well. So, I start on the clutch side thinking this should be easier when BAM, the Bikers Choice Primeapes are not designed for use with Harley heated grips!!! I found this out AFTER calling the Bikers Choice 800 number and them calling the manufacture. Now it all comes back apart. My question is, who makes a primeape style bar that will accept the Harley heated grips? I'll check back tomorrow to see because I'm going to go start drinking now.
Last edited by offthewall; 02-02-2015 at 08:04 PM.
#189
I'm about ready to **** in my hands and rub it all over my head! After 4 1/2 hours of screwing with the throttle side, all is well. So, I start on the clutch side thinking this should be easier when BAM, the Bikers Choice Primeapes are not designed for use with Harley heated grips!!! I found this out AFTER calling the Bikers Choice 800 number and them calling the manufacture. Now it all comes back apart. My question is, who makes a primeape style bar that will accept the Harley heated grips? I'll check back tomorrow to see because I'm going to go start drinking now.
i know its a pain but at this point And if you sure theres no other issues your going to run into, it may save some aggravation and shipping time and all that goes with it. good luck, keep us up dated.
agreed a beer or two would be better than your first thoughts Lol
Last edited by Gwaxley; 02-02-2015 at 08:17 PM.
#190