CVO Dash Trim Install
#41
Ahh ok. Was just wondering after I took off mine to find the 3 holes for mounting and nothing to mount them to. Have you had any issues with the tape not holding? I live in Florida and the heat tends to make tape not always work the best.
Do you happen to have part #'s for the brackets?
Thanks,
Mike.
Do you happen to have part #'s for the brackets?
Thanks,
Mike.
That 3M stuff is brutal.
Someone else here put the brackets on, maybe you can get the part numbers from them.
#44
Hey Cape, I noticed you have the windshield bags on your bike. Is that just the ones for a 2013 or did you find them for the Rushmore. Also I ordered my insert trim for my SG today. 60 bucks at the dealership, as much as I hated going there. If you don't put the A on the end of the part number it doesn't show up, fyi
The following users liked this post:
ghostrunner (09-30-2016)
#45
77188-08 QTY 2 ??????????? Or will double stick tape do the trick? One last question do you have to remove the console from the fuel tank or just pop off the old console cover?
Thanx,
Paul
Last edited by hbsoldier3; 12-18-2014 at 10:45 AM.
#46
Yes those are the brackets and 4194 are the 3 screws that are needed. It all goes on real well. Thanks Scott for starting this trend. LOL
#48
#49
#50
JMO but I think your dash looks great. I like the chrome radio trim Especially with the chrome on the speaker grills. I have the round speaker chrome that I am going to use with the CVO grilles. I think it will blend in nice with the dash trim.