Electra Glo saddlebag lights
#21
#23
#24
The only thing with this installation is I would like at least two more zip tie double sided tape mounts. I don't like the way the wire just droops down. I went to the dealer and several part stores but no one has them. Radio shack has white ones but they would look really bad. I will contact harley when they get in this morning.
#25
Light disconnect
The plug is easy to disconnect, hopefully they left enough slack to hold the plug while depressing release and separating; Since i have the guards on around the bags, I place a cloth over the guard and disconnect the bag to lean out and then disconnect the plugs. Does 2 things protects the bag ojn and off as well as easy acess to plugs;
#26
By the way, I have a brand new IN THE BOX set of Electra Glo lights that are available if anyone wants to make a deal. I had put a set of these on prior to deciding to go with the tour pak detach kit (which includes a set). PM me or txt me @ 807-626-4789 $190. USD O.B.O. shipped to lower 48. I accept PayPal.
Mike (Lobo)
Last edited by roadkinglobo; 09-04-2014 at 10:24 AM.
#27
#28
Try trickling a little rubbing alcohol onto the top surface of the tape and paint and letting it soak in. It should soften the glue enough to allow a small gap to form at which point I would again apply a small amount of rubbing alcohol. You should be able to remove the lights, remove any remaining glue residue with a tissue soaked in rubbing alcohol. Follow up with a coat of wax.
#29
I've removed a number of emblems that were on with 3M double side tape, I apply "GooGone" to the seam where the tape meets the applied to surface. I let the first application set over night. apply a second application in the morning then warm it up with a hair dryer. Pull from one end, you can drizzle more GooGone if need be and keep the hair dryer on it. They usually release pretty easy.
#30
I've removed a number of emblems that were on with 3M double side tape, I apply "GooGone" to the seam where the tape meets the applied to surface. I let the first application set over night. apply a second application in the morning then warm it up with a hair dryer. Pull from one end, you can drizzle more GooGone if need be and keep the hair dryer on it. They usually release pretty easy.