Custom Dynamics Tri-Bar Light
#23
Correct....
There is a wire plugged in there now. I unplugged it, nothing changed. Must be a dummy plug to keep dirt out (and wires are only run to ground and running lights)
There is power in the middle pin for brake, which is not used. I tried the light and it works. Just waiting for the jumper.
Don't mind splicing wires, but have to do the wife's bike too. She would not be pleased if I just wacked off the ends on her new bike!
There is a wire plugged in there now. I unplugged it, nothing changed. Must be a dummy plug to keep dirt out (and wires are only run to ground and running lights)
There is power in the middle pin for brake, which is not used. I tried the light and it works. Just waiting for the jumper.
Don't mind splicing wires, but have to do the wife's bike too. She would not be pleased if I just wacked off the ends on her new bike!
netwon
Thread
Thread Starter
Forum
Replies
Last Post
aarondeere
Softail Models
19
12-20-2017 04:41 PM
AmericanMuscle
General Harley Davidson Chat
30
12-08-2012 08:53 PM
Airborne Limited
Touring Models
2
04-07-2012 04:41 PM