My OL insisted on a King Tour Pack to go on my 2014 Street Glide. I got the quick release mounts so that when she is not on the Bike, neither is the Tour Pack. I was to by my dealer that they make the brake/turn signal light bar for the 2014 Tour Pack, but they don't make the wiring harness for it to work on the Street Glide. Has anyone gotten one to work for them on a '14 Street Glide....Thanks.....Bill G

 

I just didn't bother. Though Custom Dynamics makes a plasma rod which you could attach to the bottom of the tourpak and just use that for brake.

 

I am using a 2013 Tour Pak on my 2014 Street Glide. I have the LED lighting on the luggage rack, side lighting and rearward brake lighting...also 12v auxiliary in the TP.
So it can be done....try a different dealer.

 

Do you have a list of parts you ordered? I need to do the same for my wife.

 

Hey Jeffkam...going into the Dealer on Tuesday next...will ask the Tech.
Hope its plug n play, but I do know that the Tech has been making up wiring looms to accommdate full CB and Intercom on my Street Glide...so it may be a custom job.

 

subscribed

 

I also have a 2012 Ultra King TP on my 14 FLHX. I made my own quick disconnect wire harness and connectors. If your interested I can take a pic of the wires I spliced into under the seat. I don't use a CB or AM/FM so this only pertains to the running and brake lights.

 

I did some custom lights on the bike using the adapter from Custom Dynamics. Just unplug the connector at the rear fender and plug in the adapter.

$30

http://www.customdynamics.com/loadeq...r.htm#Adapters

 

I've found that Custom Dynamics is my friend! I've decided to make my own Tour Pack light package. Thanks for the ideas!....Bill G

 

That's what Ive been looking for !!!
So a PRE 2014 tour pk will fit the 2014 4 point dock hardware