You will find it on Kutter, Surdyke or New Castle - which is where you should be buying it anyway, just plug the number in Google and it comes right up.

 

+1

From Kutter online HANDLEBAR Genuine Harley-DavidsonŪ Product 55800305 $163.09

 

I just installed the Khrome Werks +2 narrow sweepers (300518) on my '14 FLHTK. Purchased for $80 at Phat Performance Parts. Since I internally wired the control and grip heater wires, I had to purchase some 8" CAN extensions off ebay. Clutch and brake lines still reach without strain, but barely. I really like the position of the bars and grip angle now.

Thanks to the OP for helping me do this as probably wouldn't have tackled it without seeing how easy it was.

 

Was at the dealer today killing time waiting for the clutch recall. There was a low on the floor and got curious with the difference in the bars. From the same point to the fairing on the low and a glide, the low is every bit of 1 1/2" back.
I also measured about four other glides using the same reference, each one had a little different measurement from the factory.

 

Are you sure that's not a drag bars part number?

 

That's the Harley OEM part number for the handlebars off of the limited and ultra lows.

 

Installed the 55800305 bars. What a difference....not stretched forward anymore because I have the Lepera daddy long legs seat. The longest part of the install was six wire connector...just have to make sure the wires are situated correctly for the female end to snap back together.
This thread was very informative....thanks

 

A guy at Harley recommends LA Choppers 10" twin peeks no extensions needed but 5 hr labor for install if i want all wires internal for a cleaner look

 

got new bars from Harley, followed your directions, very very helpful ,took about 3-1/2 hours, little extra cleaning involved in that time. easier than I thought, IM 5'7 bars made a big difference. thanks for the info

 

2 inch pull backs
got them on and I am a happy camper... Bike fits perfect
I went with the Khrome Werks
http://www.khromewerks.com/SWEEPER-B...1029-1276.html part number at Drag is:0601-2857 it's different than the Khrome WerksŪ Part # 300518
I had my Indy order them for me through Drag Took 1 hour plus 30 mins labor to install them and a lowering kit on my 2014 streetglide special flhxs no wires to buy totl on my bill $95 handle bars
$180 labor
fits great
Then $30 more for installing my Tamarack Machine Works(cost $89 ) rear lowering kit for a 2014, and 2015 Harley Street Glide Special, CVO Road Glide and CVO Street Glide with Premium low spring shocks.part #THF-1S