PICS of your Rushmore ride
#1961
04-07-2017 | 05:37 AM
I lowered the front 2" but in reality it's only 1" lower than factory because of the 21" wheel. I did the Progressive drop in spring kit with the 15 weight fork oil. The bike handles great no issues with bottoming out. The front end is firm but handles great with the 21" wheel. Before I lowered it with the wheel it responded slow if that makes sense. The fork sliders clear the wrapper fender just fine more than enough room. I liked the flat spot showing on the outside with the HD logo. Wish I would have done the wrapper fender a long time ago. Waiting for my Top Shop bags and fender to come in only a few weeks left until they are here. The Factory Match is awesome to deal with.
Thanks for the info. I had the -1" AXEO kit on my last bike with the stock 19" wheel and JNR air ride in the back. It rode great, but when I aired up more for wifey, the stance was *** end high like a 70's muscle car. It might have been different if I were running a 21" up front, but I didn't have the scratch to do it at that time. Do you ride 2-up much, or do you just have the whole seat set up for aesthetics?
The Topshop bags & fender are going to look killer on your bike; I hope you'll update this thread when you get it all bolted up.
#1966
04-10-2017 | 07:18 AM
Cruiser
Joined: Mar 2017
Posts: 215
Likes: 29
From: Michigan
#1967
04-14-2017 | 03:42 AM
Ultimate HDF Member
Joined: Jun 2010
Posts: 6,066
Likes: 1,280
From: OH, USA
The following users liked this post:
FireFighter200 (04-15-2017)
#1969
04-20-2017 | 10:36 AM
Cruiser
Joined: Aug 2013
Posts: 160
Likes: 3
From: Colorado
#1970
04-20-2017 | 02:32 PM
Tourer
Joined: Feb 2016
Posts: 285
Likes: 16
From: WI
