'14 Street Glide ABS light with linked brakes issue
#81
So Roc did you get your ABS issue figured out? I have a 14 special with the same 23/17 set and giving me the blues! I had an issue where the front brake lever locked had no brake except the rear rolled right into traffic I was lucky, appreciate any feed back
#82
Only had the front brake lever kickback in the beginning.
I tried hitting brakes hard to see if ABS activates, no luck yet. guess I need to really hittem hard. Stops quick tho. I think I would feel better if I knew it was just the light and the ABS does work. I'm not buying into changing the rear wheel just yet.
#83
Just picked up my '14 SGS this weekend. Dealer installed a 21" front wheel before purchase.
ABS light blinked and went off as the book states.
As i was riding home on the freeway the ABS came on and stayed on the rst of the ride home.
Taking it back to the dealer and will advise.
ABS light blinked and went off as the book states.
As i was riding home on the freeway the ABS came on and stayed on the rst of the ride home.
Taking it back to the dealer and will advise.
#84
I just talked with RC Components again about the ABS light issue. They say that they have tried almost every possible rear wheel/tire combination on a new 14 running a 21 inch front. On the bike they just tested, they could not get the light to come on no matter what. That was with a 21 up front and everything from the stock 16 to an 18 rear.
As far as running a 23 front, there is no rear combination that will make the linked brakes happy. It looks like we have a choice of going to a 21 or hoping HD will offer a fix.
As far as running a 23 front, there is no rear combination that will make the linked brakes happy. It looks like we have a choice of going to a 21 or hoping HD will offer a fix.
#85
I just talked with RC Components again about the ABS light issue. They say that they have tried almost every possible rear wheel/tire combination on a new 14 running a 21 inch front. On the bike they just tested, they could not get the light to come on no matter what. That was with a 21 up front and everything from the stock 16 to an 18 rear.
As far as running a 23 front, there is no rear combination that will make the linked brakes happy. It looks like we have a choice of going to a 21 or hoping HD will offer a fix.
As far as running a 23 front, there is no rear combination that will make the linked brakes happy. It looks like we have a choice of going to a 21 or hoping HD will offer a fix.
I've got my dealership looking into this for my 23 / 16 setup.
Ok rode over 800 miles this weekend with the fix I posted earlier. No issues at all. For those that missed it here you go:
Sensor, Wheel Speed
part# 40615-08
Ball Bearing 25mm ID/18M
part # 9252
The second part corresponds to the PM Wheels. Other wheels might need a different part number from what I understand from Old Glory HD.
Sensor, Wheel Speed
part# 40615-08
Ball Bearing 25mm ID/18M
part # 9252
The second part corresponds to the PM Wheels. Other wheels might need a different part number from what I understand from Old Glory HD.
#86
I still didn't figure this out. No changes after 200 miles.
Only had the front brake lever kickback in the beginning.
I tried hitting brakes hard to see if ABS activates, no luck yet. guess I need to really hittem hard. Stops quick tho. I think I would feel better if I knew it was just the light and the ABS does work. I'm not buying into changing the rear wheel just yet.
Only had the front brake lever kickback in the beginning.
I tried hitting brakes hard to see if ABS activates, no luck yet. guess I need to really hittem hard. Stops quick tho. I think I would feel better if I knew it was just the light and the ABS does work. I'm not buying into changing the rear wheel just yet.
#88
Parts are due next week.
I will post results afterwards.
#89