Thanks everyone!

 

Looks good. Now if I could only find time to get mine installed.

 

Question, the left / clutch side bar is @ 3/4" longer than the right, I believe that I trimmed my TP bars on the left side as well

Do you guys trim the left grip area down and if so was it @ 3/4"

 

Do not trim. The right side 3/4 of an inch is made up with the throttle twist sensor

 

OK thanks!

first long day ride with my wife, she Haaaddd to have arm rests :/)

 

The ones you put on are the reduced reach?

looks great! I'm calling FBI monday to get my set on order.

Oh, and thanks for the picture with the arm rest - I can foresee me "having" to get those as well

 

Yeah, they put your hands up above the fairing, so I will get heated grips before winter for sure

 

Well, just want to thank you and golfblues for the outstanding information that has been provided here. Make sure you contact FBI for your finders fee
(Any chance you can post of pic from sitting in the seat?)

both bikes look great and you two were very informative and helpful

Jake

 

Always glad to help. I just measured my bars like Circa did a few post above and I'm at about 12.5" to the grip end from the rubber seal between the fairings.. I'm 5-9 with a 32/33 sleeve. So it makes sense...good luck too!

 

Sorry,

got one more question for you guys. I am going to assume you changed your bushings. I am also assuming the bolts were too short.

What bolt did you all get for the new bushings?

thanks again
jake