Lower Fairing Vent Door Slider
#1
Join Date: Mar 2012
Location: Morrisville, North Carolina
Posts: 1,512
Received 336 Likes
on
184 Posts
Lower Fairing Vent Door Slider
Hey folks,
Right side one has come loose. Does not move the vent. 2015 Ultra Limited. Is there a simple fix if someone has experienced this? How hard is it to remove front part of the fairing to access it. I have the service manual....it's not very clear. Trying to avoid taking it to the dealer. Thanks.
Right side one has come loose. Does not move the vent. 2015 Ultra Limited. Is there a simple fix if someone has experienced this? How hard is it to remove front part of the fairing to access it. I have the service manual....it's not very clear. Trying to avoid taking it to the dealer. Thanks.
#2
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
#4
Join Date: Mar 2014
Location: TOAK Northern Branch
Posts: 34,574
Received 2,087 Likes
on
1,601 Posts
#5
The following users liked this post:
talkingrock (01-11-2019)
#6
Same here. Since I only open and close them for summer and winter, I haven't tried to figure out what's causing the problem. But, if someone has an easy fix, I'm all ears.
#7
Join Date: Mar 2012
Location: Morrisville, North Carolina
Posts: 1,512
Received 336 Likes
on
184 Posts
Trending Topics
#9
You can get in there, it's a tight fit though. The rod probably just popped off the lever (mine did).
I actually hit both sides of mine with WD40 with a nozzle extension. All of the moving parts are all plastic, but the WD really seemed to help the ease of operation.
I live in Ohio and have to open and close mine quite often.
I actually hit both sides of mine with WD40 with a nozzle extension. All of the moving parts are all plastic, but the WD really seemed to help the ease of operation.
I live in Ohio and have to open and close mine quite often.
Last edited by ACLazer; 01-07-2019 at 07:23 PM.
The following users liked this post:
GalvTexGuy (01-07-2019)
#10
Join Date: Mar 2012
Location: Morrisville, North Carolina
Posts: 1,512
Received 336 Likes
on
184 Posts
The following users liked this post:
GalvTexGuy (01-08-2019)