2014-2023 Touring Models This Section Is For Rushmore/2014-2023 Touring Models
Sponsored by:
Sponsored by:

Any one running a T/MX-Bar on a Rushmore Road Glide

Thread Tools
 
Search this Thread
 
  #11  
Old 09-13-2018, 09:48 AM
cwsharp's Avatar
cwsharp
cwsharp is offline
Stellar HDF Member
Join Date: Mar 2006
Location: Utah
Posts: 2,395
Received 152 Likes on 112 Posts
Default

HD won't honor your warranty if you have a tuner (or anything else that is against EPA restrictions) as far as I have read. Everything must be HD 'approved'. Certainly a bunch of crap but I read about this concerning a failed oil pump... which has nothing whatsoever to do with EPA concerns... a scam if there ever was one. If you put one on, keep your old one so you can replace your TMax (or whatever) with your stock tuner for when you tow your junk into a dealer.
 
  #12  
Old 09-13-2018, 11:26 AM
ravnos5811's Avatar
ravnos5811
ravnos5811 is offline
Cruiser
Join Date: May 2012
Location: San Diego
Posts: 220
Likes: 0
Received 4 Likes on 4 Posts
Default

24V great looking bike. I was all set to leave my current bars on my bike for a little longer. Than you posted that picture and now I'm getting ready to order parts.

Did you paint the reflectors on your bags or are they insets?
 
  #13  
Old 09-13-2018, 06:05 PM
24v's Avatar
24v
24v is offline
Elite HDF Member
Join Date: Apr 2012
Location: San Diego
Posts: 3,986
Received 706 Likes on 383 Posts
Default

Originally Posted by cwsharp
HD won't honor your warranty if you have a tuner (or anything else that is against EPA restrictions) as far as I have read. Everything must be HD 'approved'. Certainly a bunch of crap but I read about this concerning a failed oil pump... which has nothing whatsoever to do with EPA concerns... a scam if there ever was one. If you put one on, keep your old one so you can replace your TMax (or whatever) with your stock tuner for when you tow your junk into a dealer.
LOL, I think you posted in the wrong thread.

Originally Posted by ravnos5811
24V great looking bike. I was all set to leave my current bars on my bike for a little longer. Than you posted that picture and now I'm getting ready to order parts.

Did you paint the reflectors on your bags or are they insets?
Just spray paint. I pulled the reflectors out, cleaned and painted them, then put new 3m tape on the back and stuck them back in. Cheap and easy way to make them pretty much disappear.
 
  #14  
Old 09-13-2018, 06:32 PM
blueangel73's Avatar
blueangel73
blueangel73 is offline
Elite HDF Member
Thread Starter
Join Date: Mar 2010
Location: South of Mordor
Posts: 3,947
Received 148 Likes on 123 Posts
Default

24v, I was looking at the Kraus setup. Damn that thing is pricey!!!! I didn't see one that is mounted like yours, did you make some changes to the mounting process?
 
  #15  
Old 09-13-2018, 06:39 PM
24v's Avatar
24v
24v is offline
Elite HDF Member
Join Date: Apr 2012
Location: San Diego
Posts: 3,986
Received 706 Likes on 383 Posts
Default

Originally Posted by blueangel73
24v, I was looking at the Kraus setup. Damn that thing is pricey!!!! I didn't see one that is mounted like yours, did you make some changes to the mounting process?
No, it just comes with more pieces than they show in the images. There are 2 parts to the mounting bracket so you can bend it many ways behind or in front of the bars. It is expensive for sure, but also very nice.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
d3878
Touring Models
9
03-07-2022 06:25 PM
El Rey
Dyna Glide Models
5
02-03-2020 01:20 PM
Big trucker
Touring Parts
0
05-19-2019 08:56 PM
JayhawkHD
2014-2023 Touring Models
3
07-07-2015 02:18 PM
El Rey
Touring Models
4
07-23-2012 04:12 PM



Quick Reply: Any one running a T/MX-Bar on a Rushmore Road Glide



All times are GMT -5. The time now is 02:58 AM.