2014-2023 Touring Models This Section Is For Rushmore/2014-2023 Touring Models
Sponsored by:
Sponsored by:

Powder Coat question

Thread Tools
 
Search this Thread
 
  #1  
Old 03-19-2018 | 06:54 AM
steelerdude1's Avatar
steelerdude1
Thread Starter
|
Grand HDF Member
Joined: Oct 2010
Posts: 4,608
Likes: 286
From: Johnstown, PA
Default Powder Coat question

I bought a gloss black powder coated console from eBay. Off the bike it looks great, on the bike, against my vivid black shiny tank, it looks to orange pealed. - not bad mind you, but just not a smooth and shiny.

I have zero experience with powder coatings, and am wondering if it can be wet sanded and polished like clear coat for a glass smooth finish.
 
  #2  
Old 03-19-2018 | 08:03 AM
Cygnusx51's Avatar
Cygnusx51
Ultimate HDF Member
Joined: Oct 2011
Posts: 5,691
Likes: 1,649
From: Olean, NY
Default

I’ve had a few parts that had some of the orange peel effect but usually it was only visible from the certain angles. I wondered if there was a way to work it out but I don’t know if there is. I’ve had to sand areas of powdercoated parts to get them to fit back up correctly and it’s not hard to get past the glossy finish. Underneath, the powdercoat was very “milky” in sheen. Looked like a hardened Play-Doh.
 
  #3  
Old 03-19-2018 | 10:24 AM
BigMike's Avatar
BigMike
Club Member
Joined: Jan 2007
Posts: 3,218
Likes: 1,579
From: Georgia - Go Dawgs!
Riders Club Member
Default

Not sure what you paid for the one off of eBay, but you could have had your factory console blasted and powder coated for $10 or $15 locally.

I've had every sliver or chrome part on my '15 SGS PC'd in gloss black. Not one of them has orange peel.

Contact the eBay seller.
 
  #4  
Old 03-19-2018 | 11:38 AM
todd-67's Avatar
todd-67
Ultimate HDF Member
Joined: Jun 2009
Posts: 6,899
Likes: 3,407
From: OH
Default

powder coating is a lot like painting. You have to have someone that knows what they are doing applying it. I have seen it orange peeled and put on too thick in spots and too thin in others.
 
The following users liked this post:
INJEKTER (03-19-2018)
  #5  
Old 03-19-2018 | 04:55 PM
daveblank's Avatar
daveblank
Tourer
Joined: Oct 2014
Posts: 273
Likes: 14
From: Dallas, TX
Default

Originally Posted by BigMike
Not sure what you paid for the one off of eBay, but you could have had your factory console blasted and powder coated for $10 or $15 locally.

I've had every sliver or chrome part on my '15 SGS PC'd in gloss black. Not one of them has orange peel.

Contact the eBay seller.
I wish it was that cheap here in Dallas.
 
  #6  
Old 03-19-2018 | 06:31 PM
INJEKTER's Avatar
INJEKTER
Road Warrior
Joined: Jun 2009
Posts: 1,724
Likes: 204
From: ORYGON
Default

i just got done with powder.... everything in the pic for $275 guy did a great job.....and yea u need to know what youre doing... ive have orange peel and bubbles in the past




 
  #7  
Old 03-19-2018 | 08:34 PM
peddler's Avatar
peddler
Club Member
Joined: Oct 2006
Posts: 1,582
Likes: 72
From: North East
Default

Originally Posted by INJEKTER

Very nice looking Street Glide. I noticed the AMF on your derby cover. I've got to ask. What was the inspiration for the AMF reference?
 
  #8  
Old 03-20-2018 | 05:10 AM
Dsm Limited's Avatar
Dsm Limited
Club Member
Joined: Sep 2014
Posts: 7,526
Likes: 9,695
From: Des moines IA
Riders Club Member
Default

Not my bike, but I'm going to throw a guess out there. AMF

Adios Mother F#%&er.
 
  #9  
Old 03-20-2018 | 07:31 AM
Screamin beagle's Avatar
Screamin beagle
Seasoned HDF Member
Joined: Jun 2017
Posts: 5,169
Likes: 4,101
From: Granville New York
Default

Not my bike either but maybe it's my eyes getting old but I don't see amf on the derby but looks like amc? Still i don't have a guess what that means but I really like that seat and the bikes pretty nice too
 
  #10  
Old 03-20-2018 | 07:47 AM
24v's Avatar
24v
Elite HDF Member
Joined: Apr 2012
Posts: 3,986
Likes: 706
From: San Diego
Default

Yes you can wet sand and polish powder. It will likely not get quite as deep and shiny as paint, but you should see an improvement.
 


Quick Reply: Powder Coat question



All times are GMT -5. The time now is 07:07 PM.