The stockers had way to much pullback for me, I went with the 12 Twin Peaks, much flatter, wrist are happy, and even though the grips are visible above the fairing, the wind goes over your hands. The 10" will be below the top of the fairing but higher than the factory bars.

 

I put the 10 lnch LA Chopper 1.25 bagger bars on my street glide ,I like them.they put the grip right in the middle of the mirrors. I had to get new stem style mirrors and plugs for the holes where the stock mirrors were .

 

Since I have a different fairing I will need to see how they are. My mirrors are mounted to the bars. I would like to get something that puts the grips in front of the speakers in the fairing.

thanks

chris

 

if you have a 15 it's the same fairing as my 16,10 inch bars put my hands right in front of the speakers just below the top of the fairing

 

I hate my 10” twin peaks. Way too much reach.

 

I have never tried the twin peaks. I think they call mine bagger bars.

 

Take a look at KST Mayhem Bagger bars. Great product & value. I really like my 10" KST's. I have long arms & these are a little wider than most. So be careful. Also, make sure you are happy with your seat before buying bars.

 

I went with LA Choppers twin peaks 10" bars and could not be any happier. I did the install myself in around 6.5-7 hrs running all the wires internally including the heated grips. The grips are even with the top of the fairing and just below my shoulders.

Oh and while I was at it I installed an 8"Freedom Shields windshield.

 

I put these Todd's Cycle 10" Bagger ape on my 14 Limited. They spec 10" of pull back compared to the LA Twin-Peaks 6". Really comfortable for me.










'

 

How tall are you? This is exactly what I'm looking for but at 5'8" I always worry about reach. Stock '19 FLHTK bars feel SO low but reach-wise they're not bad.