Boombox failing upgrade
#1
Boombox failing upgrade
Tried uploading the new 1.20.1. All previous updates were successful. This one was not. It did verify the file and ask if I wanted to upgrade. I press yes of course. At this point it usually starts reading and uploading the new files, I believe there is 10 of them. This time however it just toggles about every 5 seconds or so between "waiting to update" (or something like that) and a blank screen. Needless to say after 30 minutes or so I pulled the plug. Now of course the display read "insert USB to continue update."
Is there a master reset does anyone know? Thoughts on what I should do?
Thanks
Is there a master reset does anyone know? Thoughts on what I should do?
Thanks
#2
Try a factory reset...
1. Turn IGN OFF. Wait 15 seconds.
2. Press and hold power/mute button. Turn IGN to ACC.
3. Continue to press power button for 2 seconds after the WARNING screen is displayed.
4. Release power/mute button and accept warning.
The service menu may display “Diagnostic Service Not Available” when a menu option is initially selected. This message will clear once the system has finished performing the power-on process. Options are: DTCs, Audio, Display, Key input, Component menus, Version info, Reset, Touchscreen.
Reset: Pre-calibration reset: Restores factory default settings. This is recommended when there are radio symptoms and no DTCs*
Post calibrations save: Archives customers’ settings so that they can be restored after a Post calibration Reset.
Post calibration reset: Resets the radio to factory default settings and restores the last archive data stored during Post calibration save.
1. Turn IGN OFF. Wait 15 seconds.
2. Press and hold power/mute button. Turn IGN to ACC.
3. Continue to press power button for 2 seconds after the WARNING screen is displayed.
4. Release power/mute button and accept warning.
The service menu may display “Diagnostic Service Not Available” when a menu option is initially selected. This message will clear once the system has finished performing the power-on process. Options are: DTCs, Audio, Display, Key input, Component menus, Version info, Reset, Touchscreen.
Reset: Pre-calibration reset: Restores factory default settings. This is recommended when there are radio symptoms and no DTCs*
Post calibrations save: Archives customers’ settings so that they can be restored after a Post calibration Reset.
Post calibration reset: Resets the radio to factory default settings and restores the last archive data stored during Post calibration save.
The following users liked this post:
mchertel (09-14-2016)
#3
#5
Well, no luck. I followed these steps and it still just goes to the "Please insert USB device to continue upgrade" screen. I guess I will go down to Harley but not sure what they will do if the factory reset screen won't come up. Maybe trying to go back to the 1.19.2 version would work but I couldn't find that anywhere to download.
Last edited by mchertel; 09-14-2016 at 09:18 AM.
#6
#7
Try this
Well, no luck. I followed these steps and it still just goes to the "Please insert USB device to continue upgrade" screen. I guess I will go down to Harley but not sure what they will do if the factory reset screen won't come up. Maybe trying to go back to the 1.19.2 version would work but I couldn't find that anywhere to download.
Then reload it onto your bike.
Trending Topics
#8
I have tried two different USB drives and downloaded it a few different times as well. It is the only file on the USB drive and in the root. I setup an appointment with HD so I guess we will see. If it is covered under the two year then I am good unless they say that I cause it for some reason.....