I have a weird problem that I think points to the turn signal module.

No power to the front sockets on my my 2015 Roadglide, but both rears are fine.

I have the following codes:

B2141 Left front turn signal output open
B2146 Right front turn signal output open
B2151 Left rear turn signal output open
B2156 Right rear turn signal output open


Based on these codes, my right and left rear turn signals should be out as well. The only thing I can think of is the TSM (I have security, so this should be be integrated into that unit I think).

Anyone have different thoughts on this?

 

The TSSM should not affect the front running lights. Do the front turn signals flash when the alarm arms (about 5 seconds after the bike is turned off)? Do the hazard/4 way flashers work in the front? I'd be looking for a bad connection to the running/turn signal lights.

 

Rears flash and act like normal, nothing out of the fronts.

I think it is weird that I'm getting the open codes for all 4 though. I'm going to pull the fairing off to see if it have any wires rubbed through.