Alloy art led turn signal issue
#1
Alloy art led turn signal issue
I installed these:
http://www.revzilla.com/motorcycle/a...6#overview_tab
Alloy art led front turn signals and I wired them so they'd flash on turn signal. They're only 2 wire so I lost the day time running lights which I'm fine with. Now the issue is they don't rapidly blink at the physical blinker but the light on the dash blinks like crazy. Is there a specific load equalizer I can use to fix this?
2016 street glide
http://www.revzilla.com/motorcycle/a...6#overview_tab
Alloy art led front turn signals and I wired them so they'd flash on turn signal. They're only 2 wire so I lost the day time running lights which I'm fine with. Now the issue is they don't rapidly blink at the physical blinker but the light on the dash blinks like crazy. Is there a specific load equalizer I can use to fix this?
2016 street glide
#2
#3
#4
#5
Mine fixed itself in less than a minute. Just turned the key on, hit the flashers and left them on for 30 seconds or so, then turned them off and it was all good.
#7
Is there a sequence for install of the turn signals? I've disconnected the battery and nothing changed?
On install I did not disconnect the battery, just plugged them in and walked away.
Last edited by jcmer22; 06-23-2016 at 02:49 PM.
Trending Topics
#10
I found a post on here describing how to make the bike learn there's led's and only the right blinker was working properly so instead I:
Started the bike
Turn the hazards on
Let it idle for 4-5 min
Turned the ignition off while leaving the hazards on
Turned the ignition on and then turned hazards off
Turned ignition off and then back on
Both Turn signals work perfect now,
Started the bike
Turn the hazards on
Let it idle for 4-5 min
Turned the ignition off while leaving the hazards on
Turned the ignition on and then turned hazards off
Turned ignition off and then back on
Both Turn signals work perfect now,