Street Glide "Ultra"
#11
Here is my list
76000486 CB bike to bike
FPA-HCCB-14 J&M hidden CB antenna
69200865 Rider Communication harness
71500248B lighted black handlebar switch packs (has push to talk button)
Then for passenger set up, switches for tour pak
71400005 switch assembly (from an ultra)
71400006 **** PTT
71400007 **** mode
69200138 wire harness (passengers headset receptacle)
76000177 Bezel (hold passengers switch in speaker pods)
69200237 weather cap (holds passenger headset receptacle in speaker pod)
Home made harness (in progress now)
I think thats it
76000486 CB bike to bike
FPA-HCCB-14 J&M hidden CB antenna
69200865 Rider Communication harness
71500248B lighted black handlebar switch packs (has push to talk button)
Then for passenger set up, switches for tour pak
71400005 switch assembly (from an ultra)
71400006 **** PTT
71400007 **** mode
69200138 wire harness (passengers headset receptacle)
76000177 Bezel (hold passengers switch in speaker pods)
69200237 weather cap (holds passenger headset receptacle in speaker pod)
Home made harness (in progress now)
I think thats it
#12
I am right there with you Chris57. I didn't care for all the extra trim and two tone colors of the Ultra's so I opted for a Street Glide. At this point I have the HD lowers, and King tour pak with the speakers and the smoked LED light bar. I can't tell you how many times I have been told, "You should have bought an Ultra, blah blah blah". But honestly I love it and wouldn't change a thing. I have Street Glide Ultra when I want it, and a street glide when I am not traveling with my wife.
#15
I'm slowly turning my street glide into a limited too. But I don't want the tour pack. Maybe it's cheaper to just get the limited and do the mirrors and fenders because I want to get the lowers and do the aux lights and so on. Might add the CB, etc.
#16
#17
I 100% agree with this statement and would have done the exact same thing if I wanted all the bells & whistles of the UC. Bike looks killer; good job.
The following users liked this post:
Chris57 (05-18-2016)
#18
#20
Here is my list
76000486 CB bike to bike
FPA-HCCB-14 J&M hidden CB antenna
69200865 Rider Communication harness
71500248B lighted black handlebar switch packs (has push to talk button)
Then for passenger set up, switches for tour pak
71400005 switch assembly (from an ultra)
71400006 **** PTT
71400007 **** mode
69200138 wire harness (passengers headset receptacle)
76000177 Bezel (hold passengers switch in speaker pods)
69200237 weather cap (holds passenger headset receptacle in speaker pod)
Home made harness (in progress now)
I think thats it
76000486 CB bike to bike
FPA-HCCB-14 J&M hidden CB antenna
69200865 Rider Communication harness
71500248B lighted black handlebar switch packs (has push to talk button)
Then for passenger set up, switches for tour pak
71400005 switch assembly (from an ultra)
71400006 **** PTT
71400007 **** mode
69200138 wire harness (passengers headset receptacle)
76000177 Bezel (hold passengers switch in speaker pods)
69200237 weather cap (holds passenger headset receptacle in speaker pod)
Home made harness (in progress now)
I think thats it
Looking at the wiring diagram the wiring harness you are making is for the headset (mic & speakers) as well as the volume and PTT controls. Is that correct?
Will this run back to plug 280A or directly to the radio? I ask because it does not appear the 280A plug has the wiring from the radio to the 280A plug.