Air ride 2014+ dash switch part #?
#1
#2
Check out the link below for a diagram;
http://partstream.arinet.com/Mobile/...S5tJvFxE1.html
Last edited by CPT_Carrera; 01-14-2016 at 03:07 PM.
#4
Life Saver
I have searched the net high and low couldn't find any info on the dash rocker switches. Then i had the great idea of asking the HDForum And what do you know i found salvation. Now the part numbers that were givin, are they from Harley or somewhere else? I clicked the link but it didn't work for me. Is the entire auxiliary harness and switch pack all ready in my dash with a dumby switches? And the last question does anyone know where i can find custom rocker switches that fit in the housing shown above. I have seen a lot of laser etching switches and i would like something like that. 2015 street glide special
#5
I have searched the net high and low couldn't find any info on the dash rocker switches. Then i had the great idea of asking the HDForum And what do you know i found salvation. Now the part numbers that were givin, are they from Harley or somewhere else? I clicked the link but it didn't work for me. Is the entire auxiliary harness and switch pack all ready in my dash with a dumby switches? And the last question does anyone know where i can find custom rocker switches that fit in the housing shown above. I have seen a lot of laser etching switches and i would like something like that. 2015 street glide special
https://www.hdforums.com/forum/new-r...tch-flhtk.html
Not sure about custom switches. One thing to note is if you try to use a switch meant for one side, it will be upside down if you try and put it on the opposite side. You can flip the cap over by carefully prying the cap up with a tiny screwdriver but they aren't meant to be flipped honestly. There is a tiny detent in the cap that makes it tough to place it any way other than the way it was meant to be. Still, it can be done and the end result looks like something stock.
Last edited by CPT_Carrera; 01-14-2016 at 08:55 PM.
#7
Trending Topics
#8
#9
https://serviceinfo.harley-davidson....ive=false&.pdf
Over 2 amps, use switch number 3 (switched relay output) & a momentary switch from the CVO lock or unlock function instead of the latching switch in this kit.
#10
This what you're looking for?
https://serviceinfo.harley-davidson....ive=false&.pdf
Over 2 amps, use switch number 3 (switched relay output) & a momentary switch from the CVO lock or unlock function instead of the latching switch in this kit.
https://serviceinfo.harley-davidson....ive=false&.pdf
Over 2 amps, use switch number 3 (switched relay output) & a momentary switch from the CVO lock or unlock function instead of the latching switch in this kit.