I got these from Mutazu on eBay. Vivid black for under $200

 

I got my lowers right from the moco. They were only $25,000.00. But, they included the wethead engine, tourpack, cruise, boom box, heated grips and the rest of the Limited package for free.

Lol

 

I wanted a Street Glide Ultra, so I made one!

 

What parts are needed to install the tour pack lighting? Have been told multiple times it cannot be done for a tour pack on a street glide

 

Sounds like you have a SSGS (Super Street Glide Special)

 

Curious about this as well. Have all the lights, need the wires, but the harness on the bike is not the same as a ultra/limited. My bike looks very similar to his, but far more black than chrome.

 

I am happy with mine.

 

They are the Streamliner pegs on the short 360 mounts, all powder coated gloss black.

 

Here are the parts you will need to make a King Tour Pak into a Ultra Tour Pak. There are only 4 large holes that need to be cut, 2 for speaker pods, 1 for wiring harness and 1 for the tail light assembly, there are several small mounting holes that will also have to be drilled to mount the speaker pods/tail lights/ luggage rack, they are marked on the inside of the Tour Pak. Hope this helps!




67800368 LAMP SMOKED, TOUR-PAK

54352-09 Tour-Pak Side Marker Light Kit Smoked Lens

Or if you prefer the Red Lens

67800093 LAMP RED, TOUR-PAK

69494-06 Tour-Pak Side Marker Light Kit Red Lens

69200131 WIRING HARNESS, TOUR-PAK

69200210 CABLE EXTENSION, AM/FM ANTENNA

69200032 Ultra WIRE HARNESS, AM/FM ANTENNA (this runs from the radio back to the Tour Pak harness, the stock FLHX/S Radio Cable is not long enough)

53000308 COVER, TOUR-PAK WIRING

53000132 GROMMET

93300049 LINER, MOLDED, W/ POUCH

76000505 Tour-Pak Rear Speaker Enclosure Kit (Radio will have to be flashed by dealer to turn rear speakers on)

53000329 Tour-Pak Rear Tail Light Chrome Trim

62515-10 Tour Pak Emblem Chrome-Black (Harley Davidson script)

53665-87 Premium Tour-Pak Luggage Rack

69200772 LED Light Kit Wiring Harness (This harness is needed to make your wiring harness from Tour Pak lights connector to Rear lighting connectors on the bike) NOTE: Requires splicing and soldering 6 wires, it is very simple to do. NOTE: If you are not comfortable doing this, have someone who does electrical work do the job for you.

 

OEM Lowers