Look what I found.......
#11
Wow! I have 5k miles on my RGS and LOTS of those miles are at 80mph/3k-rpm...so far all of my nuts and bolts are on my bike. All the nuts n bolts that were removed to install aftermarket goodies got a touch of loctite...including the cap screw and locknut of the PM contour brake and heel/toe shift levers. I think loctite/threadloc should be a required extra step to help mitigate loose and lost parts.
#13
The wife's fell off coming home from the dealer!
They gave me a free one, took it home, used a thin 4" cut off wheel and widened the space where the pinch area is.
Now, when torqued, there is still a gap, so I know it is holding.
also put blue Loctite on the bolt as well as the shaft splines.
They gave me a free one, took it home, used a thin 4" cut off wheel and widened the space where the pinch area is.
Now, when torqued, there is still a gap, so I know it is holding.
also put blue Loctite on the bolt as well as the shaft splines.
#14
#15
I agree, this is down right pathetic It would be one thing if it was just the bolt loosened up, but when people are saying that it won't clamp down far enough to tighten down that is a real problem. Mine were ok at last check, but now I'll always be wondering if on that long touring ride if It'll hold together. Not good.
#16
I had the same thing happen. Folks here said I needed to learn how to properly maintain my bike. I'm not the shaprest tool in the shed, but this wasn't my fault.
I posted picture of the stock front shift lever that show how the the threads on the retaining bolt perfectly line up with splines. https://www.hdforums.com/forum/new-r...l#post13383918
I replaced my stock front lever with a +1 Softbrake lever and skipped the rear one all together.
I posted picture of the stock front shift lever that show how the the threads on the retaining bolt perfectly line up with splines. https://www.hdforums.com/forum/new-r...l#post13383918
I replaced my stock front lever with a +1 Softbrake lever and skipped the rear one all together.
#17
#18
Bikers understand this and know with all the unforeseen chit that can happen, to at least take care of the small things that is an easy fix. Bikers are survivors, doing things they need to and liking it, getting to know there bikes, no winning on a public forum about the pettiest stuff.
Apparently Cyclist may be a better term for some. Most have had this problem, it is nothing new. If your a forum winner please fell free to be offended.
#20