Thinking of adding cams to my '14 FLHTK. My riding includes city driving and touring, mostly two up. Anyone have suggestions/experience with good low-mid range cams? Thanks.

 

TTS-100 cams are worth serious consideration for what you describe.

 

Heres a few... SE255, Woods 222 & TMan 555

I had the SE255 in my 07 SG/ 103 - it ran well, provided decent TQ at low rpms but it ran out about 4400 or so. Im looking for cams now for my 14 SGS & the Woods 222, 555 & TMan 555 are under consideration. But Im still digging through dyno charts & such.

 

Woods 222 - there is a Fuel Moto thread that has some good dyno info - https://www.hdforums.com/forum/new-r...fuel-moto.html

 

I agree. For a touring bike looking for low end grunt off the line and at cruising RPMS, the Woods 222 is my choice if I were doing a cam upgrade.

Sent from my iPhone using IB AutoGroup

 

I did S&S 585's to give me more midrange and cruising pull since I was more than happy with the bottom end output of my SGS from the factory. Complimented with a full S&S exhaust, stage 1 intake and power vision, I pulled 100 hp/107 ft lbs on the dyno after tuning and power doesn't drop off until after 6,000 rpm.

 

Six shooter at what RPM does that setup get to 100 ftlbs?

 

Can't remember exactly, I'll check on the dyno sheet in a bit.

 

Just after 3,000 to just after 5,000 rpm.

 

Nice results with the minor modifications.
Investigating for my upgrade.