Cell & Voice Without Helmet Mod
#31
Mike
Mike behind PV
Here's how I did my mike I used the mike from a Harley head set. If you use any other mike I think you will have to use a blocking cap on the mike +line because there is +5 volts on mike Jack that feeds a preamp in the Harley headset if you take a head set apart you will see a small board that is in line with the mike that is the amp. I pluged the mike into plug under the fairing called 280 I did not buy the extra $70 cable Just ran 2 small wires and used crimp slip connectors. Works great for voice commands and CB I only use it for the voice commands
Mike behind PV
Here's how I did my mike I used the mike from a Harley head set. If you use any other mike I think you will have to use a blocking cap on the mike +line because there is +5 volts on mike Jack that feeds a preamp in the Harley headset if you take a head set apart you will see a small board that is in line with the mike that is the amp. I pluged the mike into plug under the fairing called 280 I did not buy the extra $70 cable Just ran 2 small wires and used crimp slip connectors. Works great for voice commands and CB I only use it for the voice commands
Mike behind PV
#32
Mike behind PV
Here's how I did my mike I used the mike from a Harley head set. If you use any other mike I think you will have to use a blocking cap on the mike +line because there is +5 volts on mike Jack that feeds a preamp in the Harley headset if you take a head set apart you will see a small board that is in line with the mike that is the amp. I pluged the mike into plug under the fairing called 280 I did not buy the extra $70 cable Just ran 2 small wires and used crimp slip connectors. Works great for voice commands and CB I only use it for the voice commands
Mike behind PV
Here's how I did my mike I used the mike from a Harley head set. If you use any other mike I think you will have to use a blocking cap on the mike +line because there is +5 volts on mike Jack that feeds a preamp in the Harley headset if you take a head set apart you will see a small board that is in line with the mike that is the amp. I pluged the mike into plug under the fairing called 280 I did not buy the extra $70 cable Just ran 2 small wires and used crimp slip connectors. Works great for voice commands and CB I only use it for the voice commands
Mike behind PV
TIA
#34
You want just the connector? There are a couple guys on ebay that sell just the molex plugs.
#36
#37
I think I figured it out. Female molex (outer) connector shells holds 12 male pins, the male shell has 12 sockets. Nice.
So I ordered from brussellex on ebay:
1 Harley 12X GRAY MALE OEM Molex MX150 connector + terminals switch wiring 07 up
Item price $9.95
Quantity 1
Item number 250913576035
If it all works out, as the Terminator said, I'll be back.
So I ordered from brussellex on ebay:
1 Harley 12X GRAY MALE OEM Molex MX150 connector + terminals switch wiring 07 up
Item price $9.95
Quantity 1
Item number 250913576035
If it all works out, as the Terminator said, I'll be back.
#38
Sorry I did not see the ? Yes I wired just the mike from a harley headset
with out the $70 cable. I used very small red crimp on female spade connectors on the wires and then just slipped them on the correct pins in the 280 plug inside the fairing.
My name is Chuck not Mike I think thats why i missed it
with out the $70 cable. I used very small red crimp on female spade connectors on the wires and then just slipped them on the correct pins in the 280 plug inside the fairing.
My name is Chuck not Mike I think thats why i missed it
#39
This is the correct connector. The wires from my cheapo mic are way too small for me to crimp into the Molex socket terminals. I'll have to figure out how to proceed.