Khrome Werks 2+2 Narrow Sweeper BarS Install
#51
06-01-2015, 03:05 PM
me too
I installed the narrow +2 sweepers on my 2014 Limited a few weeks ago. I've had my seat lowered a bit by MCC and didn't feel the need to go up any higher than the standard +2 sweepers. Happy I decided not to get the 2+2 as I think my ride position is about perfect now with my back planted firmly up against the backrest. I'm about 5' 11" tall.
#52
06-02-2015, 07:50 AM
Cruiser
I did 4000mi last week and my shoulders and middle-back were sceaming after the first hour most of the time. I'm interested in your results as I'm 6'2 and considering installing the same bars for more pull-back and lower arm position.
BTW, what bike and bars are you currently using?
BTW, what bike and bars are you currently using?
#55
06-02-2015, 10:07 AM
Cruiser
#56
06-02-2015, 11:29 AM
Stage IV
#57
06-04-2015, 12:57 PM
Cruiser
#58
06-04-2015, 03:24 PM
Bert, GREAT write-up. THANKS for the before and after pictures!
I too want to swap bars for more pull back (and I have longer arms, but prefer a closer riding position) but want 1.25" as someone else mentioned.
On the KW webpage, there are some 1.25" listed, both 2 and 2+2. I'm leaning toward the 2 but wonder if the heated grips will fit (no mention in the KW literature about heated grips). What's the deal? What makes the bars accept heated grips or not?
Here is the link for the 1.25"
http://www.khromewerks.com/1-25-INCH...1029-1267.html
I too want to swap bars for more pull back (and I have longer arms, but prefer a closer riding position) but want 1.25" as someone else mentioned.
On the KW webpage, there are some 1.25" listed, both 2 and 2+2. I'm leaning toward the 2 but wonder if the heated grips will fit (no mention in the KW literature about heated grips). What's the deal? What makes the bars accept heated grips or not?
Here is the link for the 1.25"
http://www.khromewerks.com/1-25-INCH...1029-1267.html
The bars you are looking at are not sweepers and are not narrow.
#60
06-04-2015, 10:36 PM
Tourer
Join Date: Jul 2008
Location: Pikeville, Ky
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Great job. I've been looking at these for sometime now.
Is there plenty of room to rotate the gas and clutch assembly up? I have a set of khromewerks now on my 2014 limited, but they're not the sweepers. And the bolt for the clutch line and brake line hits the bars if I try to rotate to where I want them.
Is there plenty of room to rotate the gas and clutch assembly up? I have a set of khromewerks now on my 2014 limited, but they're not the sweepers. And the bolt for the clutch line and brake line hits the bars if I try to rotate to where I want them.