You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
Can anyone give me a time frame on how long it takes to installpassing lampsand signal kit for the Street Glide. I was quoted 2-3 hours at my dealer and am wondering if it's fair or not.
Thanks
Part # 68450-04A Lamps
Part # 69228-04 Signal kit
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
__________________
Finally bought what I really wanted all along
2006 Street Glide
RE: Install time on passing lamps for Street Glide
not fair....for someone who sposed ta know how it should take an hour or less...trick is to assemble loosely and feed all the wires thru on the bench...then tighten em down in a logical order(instructions aint real clear)...then put it on the bike...all thats left is takin the lower dash and ignition switch off to install the switch...while your there go ahead and piggyback the orange wire to the red wire on the acc switch to make em stay on when your headlite's on high...it did take me acoupla hours cause i built it all and tighten'd it up without payin attention to the wires ...had to redo it
RE: Install time on passing lamps for Street Glide
Mine were dealer installed and labor was 1 hour.
Ride Safe,
Mike
__________________
2006 Street Glide, SE Stage 1 A/C, PCIII
Vance & Hines True Duels with Wild Pig Slip ons
My Web Page: http://www.bright.net/~goldwing
RE: Install time on passing lamps for Street Glide
HD makes lights that goes on the engine guard that will light up the night, get attention in daytime, and the bulbs are about five bucks. I have them and everyone says they are brigther. They keep the clean look that the SG has.
RE: Install time on passing lamps for Street Glide
Gotta agree with FastLane
Quote:
HD makes lights that goes on the engine guard that will light up the night, get attention in daytime, and the bulbs are about five bucks. I have them and everyone says they are brigther. They keep the clean look that the SG has.
I just installed these lights on my '06 SG, LOVE the look, plus kept the wiring hidden for a more custom look.
RE: Install time on passing lamps for Street Glide
I have these said lights on and they are alot brighter than stock. If you change the headlight bulb to a Sylvania Silverstar you will notice a huge change in the amount of light you throw out into the night. Just my .02
Quote:
ORIGINAL: Fastlane
HD makes lights that goes on the engine guard that will light up the night, get attention in daytime, and the bulbs are about five bucks. I have them and everyone says they are brigther. They keep the clean look that the SG has.
RE: Install time on passing lamps for Street Glide
I did mine in 2 to 2-1/2 hours. Plus. I had to run all the wires back through the lamp housings because they were removed when I had them blacked out so that put me behind a bit.
All in all it is an easy job and if you have little time to do it don't even bother to start the install. Set aside an afternoon and take your time and enjoy it. That is what I call 'fun wrenching'.
RE: Install time on passing lamps for Street Glide
Bad azz electraglide, thats some lighting on your bike, shouldnt be a problem seeing you at night.
Could proably light up a football field.like the lights on the crashbars, nice look. Just got a 2007 SG , moved up from a 95 softail custom.
Install time on passing lamps for Street Glide
...had to redo it
