You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
I recently had the SE 110 ci Big Bore Kit added to my '07 Street Glide along with a PC-V (Fuelmoto) that I already had. I was advised by Fuelmoto that their maps are very, very, limited for a 110 ci motor, basically almost non-existent.
They actually provided me with a map for a 110 ci w/ 2 into 1 Thunderheader, which I downloaded yesterday, but I have TD Thunderheaders. So, to make a long story short, the bike was popping, sputtering, and it used an excessive amount of gas yesterday, 3/4 tank for a roundtrip of 150 miles!
My build was done by an HD dealership but they did not Dyno tune it due to the 500 mile break-in period. It will be tough getting the 500 miles in with a bike that runs like crap, especially here in Michigan when its getting really cold.
What do you guys suggest?? Will the PC V Autotune help me?
All comments/ideas are welcomed!
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
__________________
Steve
'07 Street Glide, SE 110 ci, Black Cherry, Dual Thunderheaders, PCV
'07 Road Glide, SE 103 ci, Mirage Orange, Chopped TP, SE HB
I recently had the SE 110 ci Big Bore Kit added to my '07 Street Glide along with a PC-V (Fuelmoto) that I already had. I was advised by Fuelmoto that their maps are very, very, limited for a 110 ci motor, basically almost non-existent.
They actually provided me with a map for a 110 ci w/ 2 into 1 Thunderheader, which I downloaded yesterday, but I have TD Thunderheaders. So, to make a long story short, the bike was popping, sputtering, and it used an excessive amount of gas yesterday, 3/4 tank for a roundtrip of 150 miles!
My build was done by an HD dealership but they did not Dyno tune it due to the 500 mile break-in period. It will be tough getting the 500 miles in with a bike that runs like crap, especially here in Michigan when its getting really cold.
What do you guys suggest?? Will the PC V Autotune help me?
All comments/ideas are welcomed!
What cams are in the 110?? if they are big lift then 3/4 tank for 150 mi is good!! 3/4 tank is about 3.75 gal, 150 miles, call it 40mpg. Highway fuelling cant be too bad, maybe just your idle settings are off??
As chris said you could get a sert, the SERT disc comes with lots of canned maps that would get you running better. Of course if you wanted a sert you would have bought one instead of the PCV.
If I was you I would have a big whinge to your dealer who built the motor. Surely they have some maps. Its not like 110ci engines are rare or new or special.
__________________
2009 King - "One King to Rule them All"
Flame Blue / Pewter Pearl. HDI spec - ABS and Security etc. ABS disabled (its rubbish).
S&S 124 hot set up kit w S&S 640 gear driven cams / SE 58mm TB and injectors / SEST / Feuling pump and plate / V&H Power Duals / V&H Basic Slip Ons. 12.25 @108mph with screen n bags on.
Secret Weapon - Escort 9500ci
Need Your Opinions!! SE 110 ci limited Maps
