You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
HELP!! Just purchased a '08 Classic and I can't get it to start
Hi
My '08 classic just got delivered today, bought it through Copart, it has slight damage, here is the problem, it has the smart securty, I do have the keys and fob but it still won't power anything up, the bike battery is charged and I did change the battery in the fob, but I have no way of knowing the pin number. Is there anyway of unhooking the system? any other ideas other than take it to the dealer? Thanks
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
Is the VIN number filed off the frame? Is somebody looking for their '08 Classic now?
__________________ 2007 UltraClassic\103"BB\.030 Cometic Head Gasket\SE 255's Doherty PowerPACC w/vents\Supertrapp SE's\SERT\Bagger Brace M1 15W-50 incrank\Redline MTL in Primary\Redline Shockproof in Tranny My other toy!
If you have the owners manual, you can check it. There is a way to start the bike without the fob.......but if you ain't got the manual, good luck on figurin' out how to do it. Involves pressing the turn signal switches a certain amount of times on each side in sequence. See if you can find it. Oh, and you better hope the old owner didn't change the factory default, or it's off to the stealer to reset......good luck!
HELP!! Just purchased a '08 Classic and I can't get it to start
