Is there Saddle bag fasteners that DON'T SUCK!!! - Page 3

Arizona · #21 08-26-2009, 01:18 AM

Quote:

Originally Posted by thealien

The clips are not adjusted properly. I just redid all mine while I was replacing a couple of related parts. You wouldn't believe how easy they work when adjusted properly. Having them misadjusted puts a strain on everything and can lead to broken parts!

Yeah I agree, I've never had any trouble with those pins on two different bikes. They go in and out easily. I'd guess your's is not adjusted right.

This ad is not displayed to registered and logged-in members.
Register your free account today and become a member on HD Forums!

mainshaft · #22 08-26-2009, 05:58 AM

skydoc nice pic, thanks for sending.

Peppa1 · #23 08-26-2009, 07:20 AM

I use a bolt with washer on front & back and a wing nut on the front hole on each of my bags and it makes it nice & secure.

JayStronghawk · #24 08-26-2009, 07:27 AM

Think will go the Bolt Route Myself just for security and peace of mind when flying down the Interstate at 85+ ...

ddwyer · #25 08-26-2009, 09:25 PM

I saw these guys at Americade in June (don't know if it will work, but it seems like a good idea): http://www.ghostbrackets.com/

gmc · #26 08-27-2009, 10:18 AM

I use the clevis and hitch pin method. I fasten the pin on the bracket and it stays put and then put the saddlebag on. I only do the front ones.

Backside on the bracket, as you can see I used a nut as a spacer but I'll get around to drilling a hole in the pin.

I use the clevis and hitch pin method. I fasten the pin on the bracket and it stays put and then put the saddlebag on. I only do the front.

sgtmcc · #27 10-21-2009, 07:29 PM

I recently had mine walk away from my scoot. Bags were locked and someone popped the pins from the rear and away they went. Can't seem to find a locking device, so a good nut and bolt will be installed once I get the insurance to replace.

psychocircus · #28 10-21-2009, 07:54 PM

this is gonna be investigated further...ive been trying to figure out a better way of mounting other than the stock setup. like the clevis/ cotter pin deal alot. guess i got this weekends project down.

qtrracer · #29 10-21-2009, 08:08 PM

Those are Dzus fasteners and hold the body panels of dragsters at over 300mph, you're doing something wrong, either in alignment of clip or installation of fasteners if they are falling off. So go with the bolts or the clevis pins and hairpins if you want to.

D2R · #30 10-21-2009, 08:30 PM

I've had them on 3 different bikes with no problems.Like the above post said they're used on race cars and aircraft (or something similar).I'd use bolts if I had any fear of my bags disappearing in the middle of the night though.