You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
I do not want to miss lead you, the ones I tried were from a 2007, harley may have made changes to make them fit, and the new ones will retro fit on older bikes.
Right, I understand. I'm hoping that is the case. I will post up a thread if/when I get them installed.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
__________________ 2010 Road Glide Custom Cee Bailey's Euro shield
Vented lowers
S/E Ventilator
Fuelmoto PC-V and Powertube
FROM HD P&A catalog:
NEW VENTERD LOWERS
"Fits '83-later Touring and Trike models (except '98-'09 FLTR). Stock on FLHTCU, FLHTK and FLHTCUTG. '10 FLHXSE and FLHXXX models require the installation of Engine Guard P/N 49184-09 or 49050-09. Will not fit with Mustache Engine Guards"
I seen em on a 2010 FLTRX ...for you grammer folks, I am in da south...
__________________ 05 FLHRSI/95ci/ SOLD! 09 FLTR Red Hot Denim/HOME!
Installation takes maybe 30 minutes or less. A few hand tools and the instructions that come with the lowers and you're all set. Is there something in particular you wanted to know?
I installed the vented lowers from my 02 Road King on my 07 Road Glide last year. I notched the rubber trim on the lowers where it touched the fairing, other than that, it fits fine.
For some, this would not be acceptable...in my case I already had the lowers, and definitely wanted the Harley vented ones. 2010 models weren't out yet.
Mark posted a thread a few weeks ago on changing the fairing brackets on an older RG to those on the new 2010 model. This allows the vebted fairing to fit without any cutting.
Installation takes maybe 30 minutes or less. A few hand tools and the instructions that come with the lowers and you're all set. Is there something in particular you wanted to know?
Marc
I was just looking @ a set on a '07 SE Ultra & the ones on H-D catalog must be different for 2010 as the tabs off '07 cap look as if they they would hit fairing bracket on my '10?
__________________
2010 FLTRX Black
"Please say a prayer for my Friend Amy on a complete recovery of her m/c accident"
I installed the vented lowers from my 02 Road King on my 07 Road Glide last year. I notched the rubber trim on the lowers where it touched the fairing, other than that, it fits fine.
For some, this would not be acceptable...in my case I already had the lowers, and definitely wanted the Harley vented ones. 2010 models weren't out yet.
Mark posted a thread a few weeks ago on changing the fairing brackets on an older RG to those on the new 2010 model. This allows the vebted fairing to fit without any cutting.
Mark is extremely talented, I wouldn't try this myself, but the thread is informative.
Thanks. I did see this. I was concerned that pre '10 lowers say off an Ultra will not fit with the length of upper mounting caps. Seem too long & would hit fairing brackets?
__________________
2010 FLTRX Black
"Please say a prayer for my Friend Amy on a complete recovery of her m/c accident"
FROM HD P&A catalog:
NEW VENTERD LOWERS
"Fits '83-later Touring and Trike models (except '98-'09 FLTR). Stock on FLHTCU, FLHTK and FLHTCUTG. '10 FLHXSE and FLHXXX models require the installation of Engine Guard P/N 49184-09 or 49050-09. Will not fit with Mustache Engine Guards"
I seen em on a 2010 FLTRX ...for you grammer folks, I am in da south...
I'm fuggin confused!!...for you Southern grammar folks, I'm in da North!!
__________________ '09 FLTR - Red Hot Sunglo "People are more violently opposed to FUR than LEATHER because it's safer to harass rich women than motorcycle gangs."
I'm fuggin confused!!...for you Southern grammar folks, I'm in da North!!
Yes, I can read. I do have a catalog as well. I also looked @ '07 lowers on a friends ultra & top caps looked a little long to clear fairing brace. I have no problem ordering the ones from catalog for fitment, as they could be universal for prior year ultras & '10 RG since making top caps shorter would not effect ultras. The same may not have been true for prior year ultra fitting '10 RG. If I'm going to spend my $ on used lowers I wanted first hand knowledge of fitment. Kinda funny about stuff like that down here in the Great State Of Texas.
__________________
2010 FLTRX Black
"Please say a prayer for my Friend Amy on a complete recovery of her m/c accident"
I'm just sitting here thinkin....smell the smoke? I may have to remove my Kuryakyn driving lights in order to get the lowers on?!?!?
Is anyone running lowers with the Kuryakyn driving lights?
I love those lights!
__________________ '09 FLTR - Red Hot Sunglo "People are more violently opposed to FUR than LEATHER because it's safer to harass rich women than motorcycle gangs."
