You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
philm, to answer your question about the header bolts, this set up is designed/intended to return the blow-by oil to the intake. but based on the parts it would be easy to set it up to vent to atmosphere. there is a rubber hose 90 that connects the head bolts with the fitting that goes into the intake mounting body. it would be very easy to change this arrangement to run the hoses off the header bolts and out to where ever you want and it wouldn't be displeasing aesthetically either.
__________________ 07 Street Glide
If you are reading this, thank a teacher. If you are reading this in english, thank a vet.
According to the S&S website, the price for all single bore dual runner breathers are below $500 now. That includes the mounting system...
The tuned runner breather for the S&S VFI Dual Bore setup (staggered) was available for both MM and Delphi bikes. S&S no longer sells the throttle body/breather combo. You can get parts but not the whole setup.
__________________
2009 BMW K1300GT
2008 Custom Bagger
124" S&S Single Bore, VFI, Rolling Thunder 200mm Frame
Baker DD6, Bub 7 True Duals, Dakota Digital Gauges
Brembo Brakes
