Electrical/Ignition/Tuner/ECM/Fuel InjectionHaving electrical problems? Need advice on ignition issues? Questions about a tuner? Have questions about a MAP or Fuel Injection? Find your answers here.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
when motor/bike gets real hot say after riding for 50 miles on a hot day there are times when I come to a stop it stalls...I have noticed that when it does this and I go to start/crank it the starter drags like the timing is too advanced...so I am thinking whatever controls timing might be throwing the whole deal off and thus I get a stall and hard crank...any thoughts much appreciated!!
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
__________________
Ron
'07 Street Glide
'05 Road King
'67 Chevelle SS
I had the dealer check if there was an update for the ecm sure enough there was and the update fixed the stall....
was not the problem...rode this weekend and long story short the wire at the ECT sensor was broken inside the insulation...quick check I pulled on the 2 wires one at a time and boy did one stretch...problem fixed for sure now...I guess so intermittent did not set P0118 code...hope this helps!!
__________________
Ron
'07 Street Glide
'05 Road King
'67 Chevelle SS
07 street glide stalls...
