Electrical and LightingTips on everything electrical and light systems.
Welcome to HDForums.com!
Welcome to HDForums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
I have a 2008 FatBoy. I am thinking of putting the HD Deluxe Auxiliary lights on . Dealer will sell lights and bulbs with 10% off. Dealer wants $187.00 to install. Is this a job a weekend mechanic can handle? Any specifics areas to be aware of if I decide to do myself? Any help will be appreciated, thank you.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
If you are referring to the passing lamps/turn signal bracket/lights similar to what's on the Electra Glides, you will need 9/16" slotted socket to tighten the nuts that secure the passing lamps to the bracket. The slot is necessary because the power/positive wire passes through a threaded stud that a nut fits over to tighten the passing lamp to the bracket. You can make what you need by grinding a slot about 3/8" or so wide along the length of the deep socket. Or you can buy one of these:
Auxiliary lights
