You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
Just did my install of the Burly kit yesterday on my 2007 Bob. It's very easy, but you do have to have the right tools, otherwise you'll probably make things worse.
Front is indeed a drop-in kit, very easy to install. Just take your bars off, unscrew the top cap (be aware there quite a lot of pressure from the springs inside), take the original parts out, put the Burly parts in and screw the top back on.
There is a video on Youtube about the Progressive drop-in kit, they show you how to do it.
I also changed out my kickstand to a shorter one.
I do have a question for you jss1975snow, did you put the burly spacers in with the front suspension (the plastic one)?
Yes 1" cut on both
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
__________________
09 Street Bob FXDB
V&H Big Shots
FuelPak
Burly Slammer 2" Low
SE Heavy Breather
