T-Bar: Pics, Specs and Opinions post em here
#1
09-17-2009, 02:11 PM
T-Bar: Pics, Specs and Opinions post em here
I would like to replace the stock handlebars and risers on my 09 FXDL. I currently run a night rod fairing and find that the stock handlebars hang way out and disrupt the flow of the bike (even if I didn't run the fairing I would replace them). I ran drag bars with 6" straight risers on my old lowrider and really liked the look.
I am leaning towards running the 1 piece T-Bars and I am hoping that the experience and opinions of the forum will help.
Replacing the handlebars will require that I relocate my indicator lights which are integrated into the riser, so I am hoping to get this right the first time : )
I would greatly appreciate if you could post your pics with the make, model and specs of the bars.
Thanks in advance.
Mat
I am leaning towards running the 1 piece T-Bars and I am hoping that the experience and opinions of the forum will help.
Replacing the handlebars will require that I relocate my indicator lights which are integrated into the riser, so I am hoping to get this right the first time : )
I would greatly appreciate if you could post your pics with the make, model and specs of the bars.
Thanks in advance.
Mat
#2
09-17-2009, 02:52 PM
Join Date: Feb 2007
Location: Harmelen (The Netherlands, Europe)
Posts: 9,002
Received 876 Likes
on
584 Posts
pic & info
Here's some info on the 55975-08A Street slammer handlebar. I've added the instruction sheet to the database
You'd check the pics in post below on how columbia whaler changed his set up:
Hi All,
The speedo mount project for my FXD with 8" Wild1's and 2" tank lift is finished and I have to say that it turned out perfect. It has been road tested for the last couple of days and I could not be more pleased. The final design was changed a little from the prototype per input from Loner. The speedo ring and lower bracket is one piece and the mounting bolts are much larger than the prototype.
I would like to thank Loner again for all the time and effort he put into this project.
Additional photos are posted in my gallery.
The speedo mount project for my FXD with 8" Wild1's and 2" tank lift is finished and I have to say that it turned out perfect. It has been road tested for the last couple of days and I could not be more pleased. The final design was changed a little from the prototype per input from Loner. The speedo ring and lower bracket is one piece and the mounting bolts are much larger than the prototype.
I would like to thank Loner again for all the time and effort he put into this project.
Additional photos are posted in my gallery.
Last edited by FXD2003Rider; 09-17-2009 at 03:05 PM. Reason: added link to post
#3
09-17-2009, 03:33 PM
Here's some info on the 55975-08A Street slammer handlebar. I've added the instruction sheet to the database
You'd check the pics in post below on how columbia whaler changed his set up:
You'd check the pics in post below on how columbia whaler changed his set up:
i run the slammers an like them alot no leaning forward.... heres a picture before I painted it,,
#4
09-17-2009, 03:37 PM
Road Captain
#5
09-17-2009, 03:42 PM
#7
09-17-2009, 03:58 PM
Road Captain
Trending Topics
#9
09-17-2009, 04:10 PM
Road Captain
#10
09-17-2009, 04:19 PM