Chassis, Suspension, Brakes, and Front End/ControlsTips involving alignment, suspension, tires, brakes, front end, and controls.
Welcome to HDForums.com!
Welcome to HDForums.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join HDForums.com community today!
I have a 93 fatboy with stock rims, I want to put spoke rims off an 02 road king. How hard is it to change from 1" shaft to 3/4" shaft? Is there a kit? Any info will help.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on HD Forums!
HD P/N 9267 is a sealed bearing for a 3/4 in axle The bearings in your 93 are timkin tapered bearings You might be able to use HD bearing P/N 9267 in the new hub if the OD of the bearing is the same as the 1in style (I believe it is ) Jireh cycles sells this bearing P/N 95-802
the late model wheel bearing OD are the same - make sure you verify the ID. You may also have to change your axle spacers.
Go to page 665 in the 2010 HD P&A manual. You probably won't need the whole kit; have the parts guys go on line and do a break down.
roll on
-L
rims with 1" shaft to 3/4"
