[2010] Programmer for Stage I Air Cleaner
Thread Starter
|
Tourer
Joined: Jun 2009
Posts: 444
Likes: 58
[2010] Programmer for Stage I Air Cleaner
I'm thinking about the Stage I Air Cleaner kit
http://www.harley-davidson.com/gma/g...bmLocale=en_US
I will need to reprogram the ECM. What programmer are you guys using with the 2010 Dynas?
http://www.harley-davidson.com/gma/g...bmLocale=en_US
I will need to reprogram the ECM. What programmer are you guys using with the 2010 Dynas?
Elite HDF Member
Joined: Aug 2007
Posts: 4,722
Likes: 7
You already have or are adding pipes or slipons too? The tuner you get should depend on what you want out of it. Are you planning on getting the bike dyno-tuned? Plan on ever doing any motor work? If so, you want something tuneable/programmable like a power commander or SERT. Just want a clean simple stage 1, a fuelpak might do the trick. But a fuelpak is not tuneable. It's a set it and forget it device.
Elite HDF Member
Joined: Aug 2007
Posts: 4,722
Likes: 7
I wouldn't bother with an air cleaner or tuner if not changing anything about the pipes. There are slipons out there that aren't really louder but provide for more air flow for a full stage 1. SE slipons, the newer versions, for example. Can probably find a good deal on a used set too. A lot of people that buy them are disappointed with their lack of additional sound and dump them.
Elite HDF Member
Joined: Aug 2007
Posts: 4,722
Likes: 7
Way overkill, especially for what you are doing. In my opinion, it's all overkill with no pipe mods. But the SERT will get the job done if that's what you want.
Thread
Thread Starter
Forum
Replies
Last Post
