When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
10-13 on the 1/4" cover bolts and internal rocker box bolts. (but I usually don't go that tight on the cover bolts unless it has copper washers/hex head bolts) 15-18 on the 5/16" rocker box bolts.
Be sure to go super slow and torque each one a little ata time until you reach spec. If you don't follow a cross pattern you risk squeezing a gasket out of place. Easy does it!
They go in towards the manifold/carb, the front goes on the left, the rear goes on the right. If you look next to the umbrella valve you will see a small nole abt 1/16" that goes through the plate. If you drill it out to 1/8" you will improve oil drain back.
Slideshow: Jason Momoa's latest restoration project blends 1920s Harley-Davidsons with modern electric technology, creating some of the most unusual hybrid motorcycles ever built.
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Slideshow: Killer Custom's latest build relies on styling changes rather than performance upgrades, giving the cruiser an entirely different personality.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
